Desiderata
New Member
- Posts
- 87
- Location
- Northamptonshire
i must admit it looked like a bodge , ive got it working by locktighting a nut in place on the thread after it passes through the hole.
A little knowledge is a dangerous thing (HELP!)
- Thread starter Desiderata
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
fook nose , it just looks that way from yer piccy. when mr grunts logs on he'll put you reet abart how it should be
Desiderata
New Member
- Posts
- 87
- Location
- Northamptonshire
cheers slob
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
No it int threaded theres a nut on either side of the hole, as you've done. If you get them nipped up something like central you should be able to set the position of the lever by moving the top bit round on the splines.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
see!! told you he'd know. why dint they keep it the same as the series??
that way they wint have needed to change the name of it either
that way they wint have needed to change the name of it either
Desiderata
New Member
- Posts
- 87
- Location
- Northamptonshire
Thanks mr Grunt, much obliged. and thanks Lord Slob.
