93 Discovery front brake problem

Hi all,
I been seaching, but can not find my simptons. The problem is iv just changed the servo & master cylinder. When bleeding the front brakes, no fluid comes out of the top nipple, fluid comes out of the lower to nipples very slow. Im using a easy bleed & im doing the inner 2 first.
Desperate to get this sorted, using it for work tomorrow, don't fancy relying on the hand brake to stop me.

Dont even think about the handbrake instead of brakes

No, just trying to make a laugh about it, iv been on it since 6, and im starting to loose the will to live.

Ok ,so used it for work, had to drive slow and keep me distance. Now, iv been outside for the last hour bleeding these brakes, loads of air in them. I started on the n/s r, then o/s/r, and then to the front, i started with the n/s lower 2 nipples, then the upper nipple, and like wise on the o/s/f, the problem is im getting no fluid at all out of the top nipple both sides. Any ideas guys.

does it have abs fitted,or are the front brake lines connected directly to the front callipers

I'd check back what you've done, it's possible (and I'm not taking the ****) that you've done something wrong or missed a step out in fitting either part or in the bleed sequence.

Last time I changed a master cylinder it just bled up as per the book.

Maybe the m&s you changed were faulty?

Hi, thanks for replys, just thought id change the m/c as i new my one was good, and yes the brakes bleed straight up.. Never felt so good.. Lets see how long i can drive it before the next thing goes wrong.