90 v8 snorkel & ride height /articulation question.

I have a ponder, yes I have searched but can’t seem to find it.

Is there a way of increasing the articulation of a 90 without changing the ride-height, bar a couple of cm or so?

Also

Does anyone know where I can get the plastic covers that go thought the rounded part of the front wing for an air pipe to go through? Its like a short pipe but half way down thers a piece of plastic the same
radius as the front wing side....

Chars all

TBH the rear articulation is about as good as you will get. The A-frame ball joint is the limiting factor there.

On the front the two bushes in the radius arm at the axle end are the limiting factor and then eventually the shock being inside the spring. If you get enough articulation out of the from then you will have to relocate the shock outside of the spring so that it doesn't hit the inside of the spring.

Think about those factors and you will gain more articulation.

If you want to go a proper silly route (and can build it right) then search for 3-link front suspension setups.

Brilliant.

thanks for the info

adie