4x4200tdi
New Member
- Posts
- 8
- Location
- pembrokeshire
ive got a defender 90 and the power steering box has started leaking oil out from the bottom seal can i just renew the seal only or do i have to get a replacement steering box complete?
90 power steering box
- Thread starter 4x4200tdi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
payydg
Well-Known Member
- Posts
- 3,903
- Location
- Aberdeenshire
You can rebuild them. Lots of good videos on YouTube on how to do this.
Sometimes just a new box is less hassle. Depends what floats your boat
Sometimes just a new box is less hassle. Depends what floats your boat
tottot
Well-Known Member
- Posts
- 7,511
- Location
- west wales coast
As long as the shaft has no side to side movement then a seal replacement should sort it.
frog hopper
Well-Known Member
- Posts
- 4,710
- Location
- france
It is a fiddle to change the seal, but I managed it so pretty well anyone can.
Remove the drop arm, clean everything up, remove the dust cover if there is one and then try and get the circlip out.
Big tray/loads of old papers underneath, start engine and turn lock to lock, this will push out the old seals.
Fit new GOOD quality seals, I used a piece of plastic drain tube as a drift to get new seals in place, and that's about it.
I did this 3 or 4 years ago and no leaks since. Of course the box itself is now tired and needs replacing, but I gained a few years on it, so I don't mind that.
Remove the drop arm, clean everything up, remove the dust cover if there is one and then try and get the circlip out.
Big tray/loads of old papers underneath, start engine and turn lock to lock, this will push out the old seals.
Fit new GOOD quality seals, I used a piece of plastic drain tube as a drift to get new seals in place, and that's about it.
I did this 3 or 4 years ago and no leaks since. Of course the box itself is now tired and needs replacing, but I gained a few years on it, so I don't mind that.
4x4200tdi
New Member
- Posts
- 8
- Location
- pembrokeshire
thanks for info will give it a try.
4x4200tdi
New Member
- Posts
- 8
- Location
- pembrokeshire
thanks will have a look on you tube too see whats involved
4x4200tdi
New Member
- Posts
- 8
- Location
- pembrokeshire
thanks there is no side to side movement so will give it a go
payydg
Well-Known Member
- Posts
- 3,903
- Location
- Aberdeenshire
Britannica restorations channel has everything you need
Rougharse Racing
Well-Known Member
- Posts
- 880
- Location
- The Grim North
The most difficult part is removing the drop arm from the shaft. You really need a special puller to remove it.
Rougharse Racing
Well-Known Member
- Posts
- 880
- Location
- The Grim North
The most difficult part is removing the drop arm from the shaft. You really need a special puller to remove it.
Similar threads
