90 load bed length

cornish rattler · Feb 28, 2015

Hi guys

I am looking at buying a compressor from machine mart next weekend but need to know what the length of the bed is in a 90 as son has my 90 at work atm so can't measure it need to know the length between rear bulkhead to back door.

the dims of the comp are ( LWH ) mm 1040 x 440 x 790 cheer's

zeaphod · Feb 28, 2015

At floor level, I measured 1220mm front to back, at the top of the bulkhead 1120mm. Should fit.

cornish rattler · Feb 28, 2015

zeaphod said:
At floor level, I measured 1220mm front to back, at the top of the bulkhead 1120mm. Should fit.

Are nice one cheer's :clap2:

warrior · Feb 28, 2015

I think from memory my waffle boards won't fit from door to bulk head but will fit side to side to side

cornish rattler · Mar 2, 2015

Hopefully mite be getting it on saturday once i have replaced my power steer pump then i can test the pump on the way to machine mart

top drive · Mar 2, 2015

if its too big just leave the tailgate down

reminds me of the story of my dad going to get my compressor at christmas.

him and the clerk trying to get this compressor into the port hole boot on my mums the Range rover toy-voque

it didnt fit any which way and ended up taking it apart in the carpark. Kit form compressor at christmas anyone?

cornish rattler · Mar 2, 2015

top drive said:
if its too big just leave the tailgate down

reminds me of the story of my dad going to get my compressor at christmas.

him and the clerk trying to get this compressor into the port hole boot on my mums the Range rover toy-voque

it didnt fit any which way and ended up taking it apart in the carpark. Kit form compressor at christmas anyone?

Cheers, yeah mine has a back door but i also have a lash down hook on each side of the tub just under the side windows so i could just stap the door agaist the comp if need be but think it will go it given the bed size

Unclefester · Mar 12, 2015

Are machine mart doing the VAT free thing again?

warrior · Mar 12, 2015

Unclefester said:
Are machine mart doing the VAT free thing again?

I get emails all the time saying so

cornish rattler · Mar 12, 2015

2h1t i forgot about this thread i didn't get it in the end as we had power steer pump problems with the supposedly new pump so ended up getting another pump instead which sorted it

if i can afford it will get it this next payday but with it being Easter and the possibility of doing some off roading somewhere i mite end up getting it next month instead just depend's really

90 load bed length

cornish rattler

Well-Known Member

zeaphod

Well-Known Member

cornish rattler

Well-Known Member

warrior

Well-Known Member

cornish rattler

Well-Known Member

top drive

Well-Known Member

cornish rattler

Well-Known Member

Unclefester

Active Member

warrior

Well-Known Member

cornish rattler

Well-Known Member

Similar threads