90 Exhaust on a series 3 ???

Hi all

Running a 2.5 n/a diesel from a 1986 90

Does anyone know will a 90 exhaust fully system fit on a series 3 i am not worry if the hangers have to be moved i wondered if it is the system was the same sort of design as the series layout

Cheers chris

it the eggzaust on the otherside in a 90?

Yes, but the series system only crosses over at the back.
Having said that I suspect there will be so much cutting & welding you might as well start from scratch

Davec said:

Yes, but the series system only crosses over at the back.
Having said that I suspect there will be so much cutting & welding you might as well start from scratch

Click to expand...

ma series one dint cross over at the back nor any that i've seen

i'v just scored a eggzorst tailpipe from one o them mitsisisisbisi evo 8's, tiz on a 3" pipe with a ~4 1/2" "silencer" fookin houge! were lookin for bit to make a noo zorst for me perkins doosil but this thing is takin the ****!!

i think i'll rehome some badgers in it instead........

slob said:

ma series one dint cross over at the back nor any that i've seen

Click to expand...

88 or 109?

Hi Dave its a 88 mate