4 Point Harness

F

Farty1

New Member

Posts

57

• Aug 2, 2010

• #1

Evening all..........
Im looking to fit some after market seats into my 1990 Defender 90 Hardtop and thought i would install some 4 point harnesses while im at it. Fitting the seats seems easy enough. Question is has anyone fitted a four point harness to said vehicle?....If so were would the anchorage points be? .... any tips/hints/photos would be great as i havent a clue were to start........Cheers.

 

top-cat

Well-Known Member

Posts

1,540

Location

Doncaster area

• Aug 2, 2010

• #2

Hi there farty 1 i have bucket seats in mine with 3" 4 point harness on both front seats.
The lap belt part of it i used the existing seat belt anchor points and for the shoulder straps i fabricated a bracket from the existing shoulder mount on both side down to a seat fixing in the back, i then welded an 1 1/2 " tube from one to the other behind the seats and above the half bulkhead and wraped the belts arround these, obviously with the correct fastenings.
Hope this helps, Tim

 

F

Farty1

New Member

Posts

57

• Aug 2, 2010

• #3

sort of with you....
Any Pics?

Thanks for the reply.

 

khaos

New Member

Posts

2,907

Location

Sheffield, South Yorkshire.

• Aug 2, 2010

• #4

An internal roll cage is the best thing to attach a harness to.

 

F

Farty1

New Member

Posts

57

• Aug 2, 2010

• #5

....now its starting to get pricey, could a military style roll bar fit into the back of my hardtop?