38a trip computer

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

BAZZ

Active Member
Posts
115
Location
Licourice Town
:)
Hi all, has anybody got the sp on the trip computers fitted to this model. Mine continues to show av mph as 29, and av mpg as 24.5. This even after resetting whilst on the move. The oddometer part of the setup seems to be as accurate as the satnav (Tom Tom), its just the rest of the info seems to be on another plant. My 38 is fitted with 18" alloys, ( L/Rr) and has 255/55/18 tyres. Hoping some one has an idea as to what might be the problem, Thanks Bazz.:smash:
 
:confused:I thought resetting only reset the current mileage reading on the dash computer (the one you get after pressing the computer selection switch on the indicator stalk twice)- in order to get all the other numbers set back to zero, power / battery feed needs to be switched off and reconnected, taking care not to end up needing the EKA code of course. I've noted that from the many times I've had to remove the battery and recharge due to the old RF receiver battery drain problem in the past before I fitted the new RF reciever....
 
:confused:I thought resetting only reset the current mileage reading on the dash computer (the one you get after pressing the computer selection switch on the indicator stalk twice)- in order to get all the other numbers set back to zero, power / battery feed needs to be switched off and reconnected, taking care not to end up needing the EKA code of course. I've noted that from the many times I've had to remove the battery and recharge due to the old RF receiver battery drain problem in the past before I fitted the new RF reciever....

Not so Rangie girl, just use the stalk button to flip through the mph, mpg etc until it shows trip 2 on the display then press and hold the stalk button for 5 seconds and all is reset. The dash button only resets Trip 1:D:D:D
 
Last edited:
Back
Top