Maat
Active Member
- Posts
- 169
- Location
- International
Hello,
My 300Tdi won't start, battery full, clean connections but when turning the key I just get a single relay click and that's all. I tried a jumper cable from the negative onto the engine block and same thing. It's the first time it's happened. It was -22 degrees C today so all I can think of is a bad ground or maybe a loose connection on the starter since it's a bit cold? Any other ideas?
P.S.: battery was warm as I keep it indoors over winter on the days I don't drive.
Cheers,
Matt
My 300Tdi won't start, battery full, clean connections but when turning the key I just get a single relay click and that's all. I tried a jumper cable from the negative onto the engine block and same thing. It's the first time it's happened. It was -22 degrees C today so all I can think of is a bad ground or maybe a loose connection on the starter since it's a bit cold? Any other ideas?
P.S.: battery was warm as I keep it indoors over winter on the days I don't drive.
Cheers,
Matt