heggars
Nec flectitur nec mutant
- Posts
- 502
- Location
- Dover, Kent
Hi all.
Bought my 300 2 weeks ago and all looked good, thought i would check out the boot floor for rust and there is non, but upon further invest the bloody sills are shot.
So after getting all the carpets and seats and the grey noise carpet out which was soaking wet, there are holes in the floor.
Now after cutting away the bad rust from the outside, i need to know what parts i need.
I have seen the complete sill set and the sill itself but unsure what i need.
I have cut the first horizontal and vertical piece you can see just under the door area, but left the next vertical piece in place before the chassis.
i have found MWC9060 and 9061 which is the sill and STC2815
I dont want to be using box section so need the proper replacement
Any help would be great
Ta Stu
Bought my 300 2 weeks ago and all looked good, thought i would check out the boot floor for rust and there is non, but upon further invest the bloody sills are shot.
So after getting all the carpets and seats and the grey noise carpet out which was soaking wet, there are holes in the floor.
Now after cutting away the bad rust from the outside, i need to know what parts i need.
I have seen the complete sill set and the sill itself but unsure what i need.
I have cut the first horizontal and vertical piece you can see just under the door area, but left the next vertical piece in place before the chassis.
i have found MWC9060 and 9061 which is the sill and STC2815
I dont want to be using box section so need the proper replacement
Any help would be great
Ta Stu
