callisr
Well-Known Member
- Posts
- 615
- Location
- Burton-on-Trent, Staffs
Hi,
In the not too distant future, I will be fitting a 300tdi into my exmod 90 2.5NA.
in order to reduce downtime, I am trying to get as much prep work done as possible.
My biggest sticking point is the exhaust. I am planning on using a down pipe from Steve Parkers ( I have made a bolt on engine mount adaptor for the o/s and am going to use the NA mount on the passenger side.
I am trying to determine if there are any off the shelf exhaust parts that will pick up from the down pipe and fit to the existing brackets on my chassis? I have no welding facilities at home so any parts (hangers etc) needed will have to be made at work. I wont be able to weld anything at home so bolt on stuff is pretty much essential!
I am hoping someone who has done this conversion can provide some details to help me out!
Thanks in advance,
Rich
In the not too distant future, I will be fitting a 300tdi into my exmod 90 2.5NA.
in order to reduce downtime, I am trying to get as much prep work done as possible.
My biggest sticking point is the exhaust. I am planning on using a down pipe from Steve Parkers ( I have made a bolt on engine mount adaptor for the o/s and am going to use the NA mount on the passenger side.
I am trying to determine if there are any off the shelf exhaust parts that will pick up from the down pipe and fit to the existing brackets on my chassis? I have no welding facilities at home so any parts (hangers etc) needed will have to be made at work. I wont be able to weld anything at home so bolt on stuff is pretty much essential!
I am hoping someone who has done this conversion can provide some details to help me out!
Thanks in advance,
Rich