300TDi Front Wing

Hello
Rather stupidly I caved in the front wing (Left hand side ~ passenger) of my 300 TDi Discovery. The wing is badly dinted in a line running top to bottom, just in front of the hinges. The door itself is not damaged and the hinges are fine. So I want to replace the wing. Looking at it, there are a set of screws just below the edge of the bonnet, and a couple of bolts behind the door, that hold the wing on.

So how easy is it to replace the wing ? Just bolts & screws or some welding as well ?

Ta

It's all bolts and screws - and you will need to apply some mastic/sealant when fitting the new wing (or refitting the old one if you did manage to straighten it).

This should help you.
Go to Section 76 Chassis and body
Service repair 76.10.24 on page 33

http://www.landy.pl/LandRoverDiscoveryWorkshop1995-1996.pdf

Cheers

Much appreciated !