2nd gear crunching!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
O

omlaysause

New Member
Posts
41
Hi Folks,
Having problems getting 2nd gear, it just crunches in. Strangely though it selects fine at stand still, it's only when moving.
1,3 & 4 all ok, although sometimes 1st can be a bugger selecting (very tight).
Also has fairley overdrive which works fine in all gears.
Do you reckon this could be a selector issue?

Thanks.
 
hint hint

3933d1195157810-gearbox-gear-synchromesh-wear-3rd4th-synchro1.jpg
 
I take it that's a picture of 1st & 2nd gear.
So they work togther. So probably a selector issue, or wear?
 
That looks familiar, although its probably the springs gone on the synchro on 1st/2nd, not 3rd/4th as shown,

You could whip off the top cover and check the selector shaft is not loose on the fork
 
You must log in or register to reply here.

Similar threads

9
2nd gear noise only on overrun
Replies
1
Views
816
tottot
tottot
M
Land rover series 3 clutch/gearbox issue, I just can't get it in gear
Replies
7
Views
2K
tottot
tottot
T
Gear selection problem
Replies
3
Views
945
miktdish
miktdish
J
2003 Disco 2 4.0 Thor Auto - strange accelerator behaviour - fixed
Replies
1
Views
902
JohnKeane
J
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
621
miktdish
miktdish
Back
Top