2a parts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks. That was a very fast response, just joined!!
Are there many members in Essex would you know?
 
Welcome to the forum
I7pha4t.jpg
 
Thank you one and all enthusiastic folk.
I feel I am in the right place.
Restoring the 2a plus the 2a I restored 6-7 yrs ago and the third Landy, 300tdi csw, bought new 97. A gluten for punishment. If anyone should know of 2a parts around the Essex area I would appreciate a lead.
 
Not too good at keeping the photographic records of my restoration projects. Saying that, I do remember taking pics of the first 2a, being neglected at the rear of the Pedley factory at Saffron Walden, previously owned by the Pedley family. She was a rot box.
I think she had been used to launch a boat into salt water. Chassis, door pillars and axle casings all rotten. I will pop a couple of photos on the link tomorrow all being well and photos are to hand. Thanks for your interest.
 
D24155EA-FBD2-4637-8D56-CCB71B45BFA1.jpegCB00358D-E49F-4944-80F2-EEBB53C1DA3E.jpeg
Found photos
55k miles, starts first turn. I replaced the clutch and thrust bearing as a precaution, thrust bearing sometimes growls!! Runs well other than that. The lack of turning circle took a bit of getting use to even after driving a 110 for over 15 years. All seals and gaskets were replaced, still the odd oil drip.
 
Back
Top