Hi all, I’ll update with more info as I can and when I am near the vehicle/parts. I have a few photos more on my build thread.
I was aiding a farmer on the restoration of her 110 pickup. I’ve since moved counties and don’t have the time or diesel to finish it. The engine is low mileage 200tdi and was running prior to me taking it off the road (I’ll confirm but pretty sure it was under 100k) The chassis was quite bad, however I did a fair bit of work in restoring it and a few t wouldn’t take a good welder long to complete. The chassis isn’t complete but is original and stamped/matching.
The project is currently in bits. There are lots of new parts - full bush kit, suspension, turrets, yrm goodies etc and lots of good parts too. Good second hand bulkhead as shown in picture, the gearbox and axles are good. Tub, cab, bulkhead, screen, seats, dash, wheels, steering wheel, wiring, clocks etc all present however seat box is dead. It was a working vehicle but failed mot on chassis and sat in a barn since. No parts have been taken from the barn so all components should be present.
The doors are beyond repair and would require replacement. The bed is easily restorable but I’d be buying a new seat box if it were me. I’d estimate that the lady owner would want around 4000 for the lot. Price can be discussed though. I actually wanted to take it myself but I’ve got a disco that never gets worked on to finish!!
The vehicle is located near bath and as mentioned is in bits. Engine is still mounted as are rear wheels but rear axle is removed.
pm me for any further info - It’s hard to get it all down on one post. I’m happy to chat about it over the phone also! It is a good project and I’m a known member whom can be trusted. If you are interested, I will drive down and box bits up and aid in the purchase.
I was aiding a farmer on the restoration of her 110 pickup. I’ve since moved counties and don’t have the time or diesel to finish it. The engine is low mileage 200tdi and was running prior to me taking it off the road (I’ll confirm but pretty sure it was under 100k) The chassis was quite bad, however I did a fair bit of work in restoring it and a few t wouldn’t take a good welder long to complete. The chassis isn’t complete but is original and stamped/matching.
The project is currently in bits. There are lots of new parts - full bush kit, suspension, turrets, yrm goodies etc and lots of good parts too. Good second hand bulkhead as shown in picture, the gearbox and axles are good. Tub, cab, bulkhead, screen, seats, dash, wheels, steering wheel, wiring, clocks etc all present however seat box is dead. It was a working vehicle but failed mot on chassis and sat in a barn since. No parts have been taken from the barn so all components should be present.
The doors are beyond repair and would require replacement. The bed is easily restorable but I’d be buying a new seat box if it were me. I’d estimate that the lady owner would want around 4000 for the lot. Price can be discussed though. I actually wanted to take it myself but I’ve got a disco that never gets worked on to finish!!
The vehicle is located near bath and as mentioned is in bits. Engine is still mounted as are rear wheels but rear axle is removed.
pm me for any further info - It’s hard to get it all down on one post. I’m happy to chat about it over the phone also! It is a good project and I’m a known member whom can be trusted. If you are interested, I will drive down and box bits up and aid in the purchase.
