grum
New Member
- Posts
- 3
- Location
- In the middle of France
Ok, after you have all finished laughing because I forgot to mark it !
While I was changing the chassis rear cross member I decided to tidy the chassis up. I'd disconnected the rear axle (except the prop) to get at the awkward bits that needed a spot of welding. One day the propshaft parted and now I have no idea how it should line up. I made a guesstimate that it should line up so that when I pick it both the ends should fold down but is that correct.
I'm in the process of putting it all back together now so hopefully someone will help so that I don't destroy the prop when I get out on the road/muddy stuff again.
Many thanks,
Grum
While I was changing the chassis rear cross member I decided to tidy the chassis up. I'd disconnected the rear axle (except the prop) to get at the awkward bits that needed a spot of welding. One day the propshaft parted and now I have no idea how it should line up. I made a guesstimate that it should line up so that when I pick it both the ends should fold down but is that correct.
I'm in the process of putting it all back together now so hopefully someone will help so that I don't destroy the prop when I get out on the road/muddy stuff again.
Many thanks,
Grum
