200Tdi PAS

A

acrimple

Member

Posts

23

Location

Northants

• Aug 17, 2010

• #1

Hi,
Just a quick question - fitting a disco 200Tdi into a 2.5NA - the power steering pump on the disco has a screw in thread (high pressure) and the 2.5 has a banjo joint so I need a new pipe. Which PAS pipe will fit as a replacement as the pump is also higher up - disco or defender pipe?
Thanks

 

instantsquid

New Member

Posts

1,362

Location

Tadley, Hants

• Aug 17, 2010

• #2

Use both!
There's a section on both pipes that is metal tubing, quite near to the pump end. I cut the end off the Disco pipe and the end of the original pipe and joined them using a small compression joint. It kept things nice and neat as the original pipe still clips to the chassis.

Ian

 

A

acrimple

Member

Posts

23

Location

Northants

• Aug 17, 2010

• #3

Thanks for that - makes sense - I have no disco pipe - but will see if I can find a fitting from an old pipe to match the pump union then I can extend the old pipe.