2005 hse

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Dpas1973

Member
Posts
55
Location
United States
Can someone please tell me a cheap calibration tool I can get for the height ride sensor? My icarsoft scanner won’t let me program the new height ride sensors and air shocks. I replaced both front air shocks and height ride sensors and it keeps dropping and saying air ride suspension inactive.
 
I can't help directly but have you double checked for leaks?
Does it drop overnight or while you are driving? What error codes do you get?
 
Drops within a minute Of driving after resetting the air ride inactive fault code. It’s odd so either the driver or passenger drop or both at times.
 
that is a suspension fault..

You need to find out why, and what code it is throwing, i'd start by checking for leaks,

The seal for the front springs rotates with the assembly i't is common for it to leak around this area.

soapy water..
 
Henry_b said:
that is a suspension fault..

You need to find out why, and what code it is throwing, i'd start by checking for leaks,

The seal for the front springs rotates with the assembly i't is common for it to leak around this area.

soapy water..
Click to expand...
I just replaced the 2 front shocks and height ride sensors last week. And it doing the same **** the old ones were doing. No fault codes come up just says height ride inactive
 
Dpas1973 said:
I just replaced the 2 front shocks and height ride sensors last week. And it doing the same **** the old ones were doing. No fault codes come up just says height ride inactive
Click to expand...
What diagnostics are you using?

An el-cheapo unit will do nowt to show faults, you need an Icarsoft LR2 diagnotics or equivalent to even get started..

If there was a fault the EAS won't function until the previous fault has been cleared..
 
Henry_b said:
What diagnostics are you using?

An el-cheapo unit will do nowt to show faults, you need an Icarsoft LR2 diagnotics or equivalent to even get started..

If there was a fault the EAS won't function until the previous fault has been cleared..
Click to expand...
Ok my dad just read me the codes he said one is articulation validity code and the other is passenger rear isn’t the same value as the drivers rear
 
So I don’t know if this makes a difference but the old height ride sensors had 5pins in the plug the replacements only have 3 but the harness that plugs into them only has 3 wires?
 
The old ones will have had 6 pins, I think 3 are for self leveling headlights if fitted. Have you calibrated the sensors?
IMO not as you are asking for a diag that will do it.
 
I just reset the fault code and drove about a block and it came up air suspension inactive. Fault code just says articulate module fail and self leveling sensors inactive
 
If the calibration is too far out you will keep getting articulation errors. I had to reset mine 5 times on Saturday and recalibrate 3 times until I got it about where I want it.
 
You must log in or register to reply here.

Similar threads

D
L320 Sport Diagnostic tools
Replies
18
Views
2K
Blob
Blob
A
Help D3 Suspension
Replies
3
Views
623
Andrew bibby
A
B
P38A P38A 1996 4.6 Auto HSE EAS slow to lower and rise + random height change to extended height + compressor running too frequently.
Replies
9
Views
1K
Datatek
Datatek
S
Height suspension / sensor issue - can't calibrate
Replies
3
Views
1K
Graculus
Graculus
F
New to the group
Replies
2
Views
572
brianp38dse
brianp38dse
Back
Top