2005 Freelander 1.8 Clutch Master Cylinder

John Williamson · Aug 13, 2015

I'm going to change the clutch master cylinder as I was told this might help with rough gear changes. But if it turns out to be the gearbox will I have to replace the master cylinder with another new one, or can I reuse the replacement one I used.

Gogsy · Aug 13, 2015

I have an auto so not 100% sure, however, I would have thought you could re-use the one you have.

freelance · Aug 13, 2015

All clutch hydraulics are external on 1.8, the master and slave come as on unit, all filled and bled, make sure your clutch actuating arm is oiled and free, and make sure the slave bracket is not cracked or bent, and perhaps give the gearbox an oil change!

Bromsgrove Defender · Aug 14, 2015

Call me pedantic if you will. BUT
Shouldn't this be in the Freelanderer section

freelance · Aug 14, 2015

Ok, you are PEDANTIC, there I said it.

Bromsgrove Defender · Aug 18, 2015

freelance said:
Ok, you are PEDANTIC, there I said it.

Thank you I feel better for that

2005 Freelander 1.8 Clutch Master Cylinder

John Williamson

New Member

Gogsy

Member

freelance

Well-Known Member

Bromsgrove Defender

Well-Known Member

freelance

Well-Known Member

Bromsgrove Defender

Well-Known Member

Similar threads