LUKBENPHI
Well-Known Member
- Posts
- 2,150
- Location
- Peak District
Evening chaps and chapettes
The freelander is going up for sale
Brand new 12 Months MOT as of 04/10/2016 with only 2 advisories for corrosion to rear brake pipes
Great condition for its year and scrubs up well, no rust that i can see and has been waxoyled underneath to protect it
2003 on a 53 plate TD4 with 132k on the clock mileage wont rise by much as it's currently on sorn
5 good tyres equal tread on all 5
Part service history, large folder receipts included with the car
just had new air /crankcase and Turbo filters new rear diff mounts x3 fitted by myself ( ex mechanic) with all receipts
Just had new fuel filter (rear driver side arch)
Recent new clutch and rear fuel pump with receipts from previous owner
Also had a new VCU and prop bearings fitted by Bell engineering at cost of £320 with receipt so car is still permanent 4x4 with no knocks or bangs from underneath
All locks and windows/sunroof work ( and no leaks ) and fitted with a CD Changer under drivers seat ( not currently plugged in) and has aftermarket stereo with Aux port for your own music
Half Leather interior
HDC fully working no lights on the dash other than when in operation as normal
Now the bad bits:
Codes have been read on both a cheap code reader and a hawkeye and have come up as follows
P0190 Fuel pressure sensor out of range
P09F6 Fuel pressure monitoring whilst starting
P09F6 NO TEXT ALLOCATED TO THIS CODE ( But the local garages cheap code reader this code showed up as reading "rail pressure control during cranking")
New Landrover overlay harness and fuel rail pressure sensor fitted over the weekend £154 worth of kit but currently unable to wipe codes as no code reader and EML light is on
FL is located about 5 miles from Bakewell in the Derbyshire Peak district
Any questions please feel to drop me a PM
Thanks
Phil
The freelander is going up for sale
Brand new 12 Months MOT as of 04/10/2016 with only 2 advisories for corrosion to rear brake pipes
Great condition for its year and scrubs up well, no rust that i can see and has been waxoyled underneath to protect it
2003 on a 53 plate TD4 with 132k on the clock mileage wont rise by much as it's currently on sorn
5 good tyres equal tread on all 5
Part service history, large folder receipts included with the car
just had new air /crankcase and Turbo filters new rear diff mounts x3 fitted by myself ( ex mechanic) with all receipts
Just had new fuel filter (rear driver side arch)
Recent new clutch and rear fuel pump with receipts from previous owner
Also had a new VCU and prop bearings fitted by Bell engineering at cost of £320 with receipt so car is still permanent 4x4 with no knocks or bangs from underneath
All locks and windows/sunroof work ( and no leaks ) and fitted with a CD Changer under drivers seat ( not currently plugged in) and has aftermarket stereo with Aux port for your own music
Half Leather interior
HDC fully working no lights on the dash other than when in operation as normal
Now the bad bits:
Codes have been read on both a cheap code reader and a hawkeye and have come up as follows
P0190 Fuel pressure sensor out of range
P09F6 Fuel pressure monitoring whilst starting
P09F6 NO TEXT ALLOCATED TO THIS CODE ( But the local garages cheap code reader this code showed up as reading "rail pressure control during cranking")
New Landrover overlay harness and fuel rail pressure sensor fitted over the weekend £154 worth of kit but currently unable to wipe codes as no code reader and EML light is on
FL is located about 5 miles from Bakewell in the Derbyshire Peak district
Any questions please feel to drop me a PM
Thanks
Phil
Last edited:
