My key fob transmitter stopped working a few weeks ago so I replaced the battery. Even tried 2 new batteries. AND put them in upside down to check. Still not working and no red light. Does anyone have suggestions as to what I should look for in the transmitter? I’ve checked it out and I can’t see any loose solder points, etc. The key still unlocks the doors and starts the truck. But I miss the keyless entry.
2002 Disco 2 key fob stopped working no light but new battery
- Thread starter Vincej
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Welcome 
- Posts
- 33,891
- Location
- North Shropshire
Hi and welcome!
Maybe you have mixed up the keyfobs from your disco and your truck
Maybe you have mixed up the keyfobs from your disco and your truck
- Posts
- 33,891
- Location
- North Shropshire
you said your fob works on your disco and your truck
just a little humour
https://www.roadworksmfg.com/wp-content/uploads/2016/04/2013_3.jpg
just a little humour
https://www.roadworksmfg.com/wp-content/uploads/2016/04/2013_3.jpg
- Posts
- 33,891
- Location
- North Shropshire
sorry for the confusion and welcome again!
thats a semi. This is a truck
https://www.ford.com/trucks/f150/models/f150-raptor/?fmccmp=lp-trucks-mid-hp-f-150-raptor
https://www.ford.com/trucks/f150/models/f150-raptor/?fmccmp=lp-trucks-mid-hp-f-150-raptor
