200 TDi fuel lines needed

nickliv · Dec 27, 2008

All of them, From the tank, all round the engine bay, to the injector pump.

Looked on the 'addocks, but can't seem to locate the required. Don't fancy going into LR main agent with my special bunning trousers on.

Any ideas? Anyone breaking one?

Cheers.

boydy1989 · Dec 28, 2008

make em! Or are u missing the unions too?

discomania · Dec 28, 2008

Get the pipe and the unions from a good parts supplyer, and make them all up..

Simpson supplies do diesel stuff, you can get all the bits you need, or see if there is anywhere local that has them (bound to be).

nickliv · Dec 28, 2008

boydy1989 said:
make em! Or are u missing the unions too?

no, I've got the unions, but foolishly thought that the fuel lines were a 'sealed unit' type of arrangement.

I shall break out the stanley knife and jubilee clips forthwith.

boydy1989 · Dec 28, 2008

I used some rubber fuel pipe stuff from blackwells hydraulics, and they supplied me with some funny crimp tight connectors, like a ring with lugs on it, you squeeze the lugs to crimp. They work really well too!

200 TDi fuel lines needed

nickliv

Active Member

boydy1989

Well-Known Member

discomania

Well-Known Member

nickliv

Active Member

boydy1989

Well-Known Member

Similar threads