porthos0
New Member
- Posts
- 125
- Location
- Good Old West Yorkshire
Just Totally Stripped A 2.5TD Engine (Into Manageable Bits) Anyone Want Anything From It, Totally Free. Some Bits Have Already Been Taken, So Anything You Want, Gizza Holler, =]
2.5TD Bits, Free To Good Home
- Thread starter porthos0
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Chunky Engineer
New Member
- Posts
- 52
Could do with a cyclinder head if you have it?
porthos0
New Member
- Posts
- 125
- Location
- Good Old West Yorkshire
Sure, Where You Based? (Tis All Pick Up Only Btw 
)
)discomania
Well-Known Member
- Posts
- 6,949
I could really do with an injection pump, still got it?
porthos0
New Member
- Posts
- 125
- Location
- Good Old West Yorkshire
You Got Mail
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
Sorry to 'jack this thread, but i have NA spares in the same situation here, pumps, and a spare (NA) head. Other bits too.
Other bits too.
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Have you still got the starter motor, or just the solinoid?
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
I have a complete known working starter here, if that helps
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
ooo how much same price as porthos0 ???
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
Can't really see why not, im open to offers though being a poor student! I just remembered I have two, one with me in wales, the other with my parents in surrey - the one in surrey is better, as the one i have here in wales was just starting to squawk occasionally when used, but it still started fine, probably just needs a service!
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
i am in no rush at all for it, got my 200tdi conversion to finish before i can get to putting the td in the series, can i stick my name on the better one we'll talk £'s when u can get to it
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
Aye! ill be going back to surrey in a week an a bit, so i should be able to grab it then for you.
yella
New Member
- Posts
- 15,991
im after all the fuel pipe work from a 2.5TD i need everything from the tank to the filter, including filter housing, then down to the ip, plus the fuel returns. cheers
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
yella
New Member
- Posts
- 15,991
no mate, ive got disco ones but i need the td ones to fit on the ip etc, they are a different bore, cheers anyway
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
You sure mate? My NA pipes matd up to some of the TDi ones i put in. I have most of the NA ones spare also, jus not the tank ones. You want any of them?
yella
New Member
- Posts
- 15,991
ill have whatever youve got mate if you dunt mind
porthos0
New Member
- Posts
- 125
- Location
- Good Old West Yorkshire
Right, So Fuel Filter/Housing/Pipes, Cyl Head, Oil Filter Housing, Injection Pump Have Gone, Anyone Want Anything Else? We're Trying To Get It Down To Having As Little Left As Possible For This Thing.
Full Set Of Reconditioned (As New) Injectors Still There If You Want Them?
Fly Wheel, Crank And Camshaft, Rocker Shaft And Rockers And A Turbo And Manifold
Full Set Of Reconditioned (As New) Injectors Still There If You Want Them?
Fly Wheel, Crank And Camshaft, Rocker Shaft And Rockers And A Turbo And Manifold
porthos0
New Member
- Posts
- 125
- Location
- Good Old West Yorkshire
Injectors And Turbo Is Now Gone Me Thinks
porthos0
New Member
- Posts
- 125
- Location
- Good Old West Yorkshire
Oil, Wont Let Me Send You PM's So Sirrus, Thanks To Ian, Is Getting The Turbo, You Or Sis To Msg Me
