markjgray94
Member
- Posts
- 79
- Location
- Northumberland
Ok so I have bought a 200tdi (disco) is there any problems i will run into I know the bell housing needs changed and tighter bend in the down pipe.
2.5 na to 200tdi
- Thread starter markjgray94
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bluedog333
Well-Known Member
- Posts
- 5,328
- Location
- Henley on Thames, Oxfordshire
I don't think anyone's answered because there's loads of info/full guides about fitting Disco 200tdis into older Landies!
bluedog333
Well-Known Member
- Posts
- 5,328
- Location
- Henley on Thames, Oxfordshire
http://www.landroverweb.com/Pdf-files/200Tdi-conversion-Discovery-engine-into-Defender.pdf
Not a n/a but the same principle!
Not a n/a but the same principle!
Javelinadave
Active Member
- Posts
- 112
- Location
- Sunny Arizona U.S.A.
It will bolt right up without issues.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Put the kettle on, make a brew and have a read of the sticky from the main page....
http://www.landyzone.co.uk/lz/f7/how-land-rover-90-td-discovery-200tdi-engine-conversion-90679.html
http://www.landyzone.co.uk/lz/f7/how-land-rover-90-td-discovery-200tdi-engine-conversion-90679.html
bluedog333
Well-Known Member
- Posts
- 5,328
- Location
- Henley on Thames, Oxfordshire
