dave evans
New Member
- Posts
- 9
- Location
- consett
oil coming out of the dipstick tube and using water any ideas guys ????
1985 2.5 td
- Thread starter dave evans
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie
Well-Known Member
- Posts
- 10,702
- Location
- Shropshire
Head cracked, block cracked pistons cracked.
It'll be 1 or more of those.
It's scrap unless you're determined.
Fit a 200 tdi.
Hello and welcome.
It'll be 1 or more of those.
It's scrap unless you're determined.
Fit a 200 tdi.
Hello and welcome.
SmileySteve
Well-Known Member
- Posts
- 1,423
- Location
- Dumfrieshire
If your lucky its the head gasket but most likely as above.......dont run it! get the head off and start looking for the damage
Hi mate
I'm after a complete 19j engine should Dave Evans (original thread post) not take you up on your earlier offer.
Can pay cash and collect anytime.
dave evans
New Member
- Posts
- 9
- Location
- consett
thanks guys gonna try a few things first and if no good I will source another engine bloody shame .but hey ho its got 270000 on it so I suppose its inevitable
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
That must be a world record for a 19j!
Try pulling off the rocker box cap with the engine running. If it is blasting out gas, head gasket minimum, scrap engine maximum.
dave evans
New Member
- Posts
- 9
- Location
- consett
nice one will give it a go cheers
Foxy
Thanks for the reply mate.
In all honesty I'm really after the power steering set-up from a 19j so not that worried whether it's a runner or not but still happy to take the whole engine if it has all the ancillary parts in place.
If you still want shot of it let me know please, no dramas either way, the original offer still stands.
dave evans
New Member
- Posts
- 9
- Location
- consett
ok guys .took the crankcase breather off was gunked up possibility of the back pressure but it had water in .head gasket you think ????
