paulypaul
New Member
- Posts
- 173
- Location
- Norf Nor****
Some time ago I bought an STC8874 12s towing socket kit for disco 2's from craddocks ebay shop.
Unfortunately it didnt include the instructions so I went into the rave cd and got some info off that.
The kit comprises of a main loom that is attached to the socket.
3 wires are the full length of the loom, red,green and blue.
2 wires are shorter and go to the rear o/s light cluster.
1 relay wired and some other wires that are fused etc.
However, the rave pictoral guide is ****e and I have got as far as attaching the socket, running the white and yellow wires up to the light cluster and attaching the white to earth.
The yellow apparently goes into a socket that sits behind the lights, but its not clear where and how to insall it.
Any electrickery experts out there that could offer some guidance would be welcomed.
thanks, Paul
Unfortunately it didnt include the instructions so I went into the rave cd and got some info off that.
The kit comprises of a main loom that is attached to the socket.
3 wires are the full length of the loom, red,green and blue.
2 wires are shorter and go to the rear o/s light cluster.
1 relay wired and some other wires that are fused etc.
However, the rave pictoral guide is ****e and I have got as far as attaching the socket, running the white and yellow wires up to the light cluster and attaching the white to earth.
The yellow apparently goes into a socket that sits behind the lights, but its not clear where and how to insall it.
Any electrickery experts out there that could offer some guidance would be welcomed.
thanks, Paul
