110 Side Fitting

border · Jul 3, 2019

Got a pair of decent 110 Sides for my rebuild, Was not sure how they fitted as did not take it apart, but have a good Idea now.
Anyway I've got 4 of the studs in photo, and 4 of the so called special washers.
I need 4 of these https://www.brit-car.co.uk/product.php/623583/0/
and think 4 of these https://www.brit-car.co.uk/product....7_2007_onwards___land_rover_series_ii_and_iii
Im sure I can make the brackets, but is there anything else I could use for the Rubbers, ?? as I really don't want to pay those prices for a few bits of metal and rubber.

kevstar · Jul 3, 2019

border said:
Got a pair of decent 110 Sides for my rebuild, Was not sure how they fitted as did not take it apart, but have a good Idea now.
Anyway I've got 4 of the studs in photo, and 4 of the so called special washers.
I need 4 of these https://www.brit-car.co.uk/product.php/623583/0/
and think 4 of these https://www.brit-car.co.uk/product....7_2007_onwards___land_rover_series_ii_and_iii
Im sure I can make the brackets, but is there anything else I could use for the Rubbers, ?? as I really don't want to pay those prices for a few bits of metal and rubber.

What about these...……..

https://www.ebay.co.uk/sch/i.html?_...ber+washers.TRS0&_nkw=rubber+washers&_sacat=0

border · Jul 3, 2019

kevstar said:
What about these...……..

https://www.ebay.co.uk/sch/i.html?_...ber+washers.TRS0&_nkw=rubber+washers&_sacat=0

Yes Mate look like they would work even if I put a few in to make the gap up, worth a try.
Just thought before I've got some spare polybushes , will have a look tomorrow, might be able to maybe cut some to fit.

kevstar · Jul 3, 2019

border said:
Yes Mate look like they would work even if I put a few in to make the gap up, worth a try.
Just thought before I've got some spare polybushes , will have a look tomorrow, might be able to maybe cut some to fit.

My mate fitted his with fibre washers & they have done the job.

mick 1986 · Jul 4, 2019

border said:
Got a pair of decent 110 Sides for my rebuild, Was not sure how they fitted as did not take it apart, but have a good Idea now.
Anyway I've got 4 of the studs in photo, and 4 of the so called special washers.
I need 4 of these https://www.brit-car.co.uk/product.php/623583/0/
and think 4 of these https://www.brit-car.co.uk/product....7_2007_onwards___land_rover_series_ii_and_iii
Im sure I can make the brackets, but is there anything else I could use for the Rubbers, ?? as I really don't want to pay those prices for a few bits of metal and rubber.

You don’t need the rubber bits. Mine hasn’t got them and hasn’t had any problems since getting it back on the road.

Hicap phill · Jul 4, 2019

Camping mat/Eva foam can be stacked & squashed as needed

Pappasmurf · Jul 4, 2019

I've just done the same job on my 90. I used all the proper fittings. Cost me £32 for everything. The rubbers help cut down on metal on metal vibrations. Just stick anything in there that will dampen vibrations.

zeaphod · Jul 4, 2019

Cut down rubber door stops springs (haha) to mind. Should be available for a few quid.

110 Side Fitting

border

Well-Known Member

Attachments

kevstar

Well-Known Member

border

Well-Known Member

kevstar

Well-Known Member

mick 1986

Well-Known Member

Hicap phill

Well-Known Member

Pappasmurf

Well-Known Member

zeaphod

Well-Known Member

Similar threads