110 Grille and Bonnet

Deetd4 · Aug 4, 2009

Hi all, I have been trawling through a few different Land Rover sites over the past few days. I came across a vehicle that is origionally a S3 109. The owner had fitted a 110 bonnet and moved the rad grille out to the front to square it all off. (Sorry it was a 110 grille) Is this just a matter of getting the bits and fitting them or is the a lot of modification needed to fit them. Just wondering for future reference. I like the square look of the 110 and my fit my 109 with the 110 parts if its not too much work.

brnocz · Aug 4, 2009

i was looking at doing this to my series and by all accounts its not a big job, but im not sure if you have to use a 110 grill panel or just move the series panel forward

Deetd4 · Aug 4, 2009

I was on another site looking at body panels and it seems all the other front end panels are the same between the S3 and the 90/110.

Only problem I can see is the bonnet locking panel. Worst case I think the origional could be left in situ to hold the rad, anyone know any different. I just like the straight front look and the slatted grill in the 90/110.

Deetd4 · Aug 5, 2009

So, No-one know how big of a job this is then, Has anyone done it/seen it done?

oil dripper · Aug 5, 2009

i,ve dun it ta mine, looks ****e :doh: an its comin off wen i can get round to doin it

doobie · Aug 5, 2009

Deetd4 said:
So, No-one know how big of a job this is then, Has anyone done it/seen it done?

i've seen it done and it wasnt hard to do apparently.

but its a bit of a personal taste thing, i like series motors for the look of them as well as all the wee quirks. sticking a defender front on makes it look like a defender, and abdy know defenders are for farmers, gays and gay farmers. apart from tweets as he had a disco......

Sirus · Aug 5, 2009

oil dripper said:
i,ve dun it ta mine, looks ****e :doh: an its comin off wen i can get round to doin it

Shall I get me baby ammer out to do that

oil dripper · Aug 5, 2009

tissa piece of **** to do

get yer a bonnet ana front panel an grille an yer headlight surrounds,and yer gorra nibble abit out yer series front panel

oil dripper · Aug 5, 2009

Sirus said:
Shall I get me baby ammer out to do that

yer can mek a start on tekin the floor out if yer wanna

Deetd4 · Aug 5, 2009

Thanks chaps, just like the squarer look of the defender. A bit tougher an a bit more robust looking. Something to look at in the future...........

110 Grille and Bonnet

Deetd4

New Member

brnocz

New Member

Deetd4

New Member

Deetd4

New Member

oil dripper

Well-Known Member

doobie

Active Member

Sirus

Your all Banned except me

oil dripper

Well-Known Member

oil dripper

Well-Known Member

Deetd4

New Member

Similar threads