110 front wing removal. HELP !!
- Thread starter landowner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
4 Bolts along side rad
4 on the bulkhead
2 connected to chassis
one connected to sill
Well it is on my series
Looks like simples then
bet they all snap off
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Ta
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
animal1988
New Member
- Posts
- 37
- Location
- Way out in the styx
yeh thts it pretty much, mine was quite easy to remove, it is jst a few bolts
YEaWWWWH!
YEaWWWWH!
Hehehehe! Yer welcome
Just wondering as I couldn't see how it was fastened on. A few bolts here and there, can't be that easy I thought.
Does the grill have to come off then, hope so then I can get some black paint on that gay grey grill trim that the previous owner put on. Must have done it for a bet
.Takin wing off cause I likes cuttin rusty metal out and welding just before me MOT which I just cancelled cause I cant get it all done in time. Had two hours today sortin Rangie out and that knackered me up, went for a lie down for an hour and had another go but ended up back home feeling ill agin. When you get older and a bit disabled small jobs take days instead of hours, but I'm gonna do it, and get me MOT eventually
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Ye must've missed the link to the n/s wing...Just wondering as I couldn't see how it was fastened on. A few bolts here and there, can't be that easy I thought.
Does the grill have to come off then, hope so then I can get some black paint on that gay grey grill trim that the previous owner put on. Must have done it for a bet
Takin wing off cause I likes cuttin rusty metal out and welding just before me MOT which I just cancelled cause I cant get it all done in time. Had two hours today sortin Rangie out and that knackered me up, went for a lie down for an hour and had another go but ended up back home feeling ill agin. When you get older and a bit disabled small jobs take days instead of hours, but I'm gonna do it, and get me MOT eventually
http://www.landyzone.co.uk/lz/f41/n-s-wing-removal-75562.html
Aye ye need to remove the grille as there's a couple of bolts up front
Ta.Ye must've missed the link to the n/s wing...
http://www.landyzone.co.uk/lz/f41/n-s-wing-removal-75562.html
Aye ye need to remove the grille as there's a couple of bolts up front
How come there is no rust on your land rover then ?
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
There was some before ah changed the bulkhead, other than that ah guess it's down to luckTa.
How come there is no rust on your land rover then ?
