110 front axel refurb

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Fire

New Member
Posts
18
Location
Southampton
98, 300tdi with 07 puma body + interior and td5 dash.
photo3.jpg

Don’t know if anyone’s interested? But here goes anyway, it started when I took the front wheels off to nip up the wheel bearings, got a little carried away and here’s what I ended up with:
IMG_3218.jpg

Took the opportunity to tart it up a bit:
IMG_3214.jpg

You’ve got to love a bit of POR15:
IMG_3224.jpg

The silver paint on the Terrafirma shocks is so thin that after a year rust was starting to show so wire brushed and POR15, they will last a while now:
IMG_3230.jpg

Did a bit of head scratching over the shock washers, but got there in the end:
Image0110.jpg

Had to fit new swivel balls as the old ones were badly pitted:
Image0117.jpg

Image0113.jpg

Job done and wheels going back on:
Image0120.jpg

While I was under there I fitted a full set of Super Pro caster correction bushes, new wheel and swivel pin bearings and a load of other bits and bobs. I’ll do the same to the rear axle once I’ve re-gained my enthusiasm.
 
Back
Top