RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
where can i get a **** load? need to be as short as possible, all the same size, where ever i look there all assorsed in size.........
10mm self tapper speed bolts
- Thread starter RAZ8550TDI
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,232
- Location
- Embasinga stocæ
matt harvey
New Member
- Posts
- 317
- Location
- liverpool
ere raz go to ralphs diy by mine they have allsorts an are quite cheap
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
do yer mean sheet stitching screws?
self drilling / tapping with a hex head?
try yer local agricultural merchants - Mole Valley Farmers sell em in bags of 100, 500 or 1000.
self drilling / tapping with a hex head?
try yer local agricultural merchants - Mole Valley Farmers sell em in bags of 100, 500 or 1000.
clivees
Well-Known Member
- Posts
- 2,070
lazydog
Well-Known Member
- Posts
- 1,592
- Location
- West Midlands
try any building site where they are putting up industrial unit i.e sheet metal roof should be able to "buy" a few of one of the lads there the steel fixers use em
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
where can i get a **** load? need to be as short as possible, all the same size, where ever i look there all assorsed in size.........
Where they for raz? not floor screws do it?
yella
New Member
- Posts
- 15,991
i'll give yer a load when yer drop that airbox off
RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
a load is in 200???
yella
New Member
- Posts
- 15,991
as long as yer count them out
wtf do you need 200 for
wtf do you need 200 for
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Shed roof?as long as yer count them out
wtf do you need 200 for
RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
cant say, they galv? staino? zinc?
Similar threads
