10 spoke 18" RR Sport Wheels

Just been trawling through all the wheel threads to see if I can find an answer to whether the 2008 10 spoke RR Sport wheels will fit my P38 and haven't found it.

Does anyone know please?

Need to organise a set of new tyres and it's always worked out well in the past buying nearly new wheel and tyre sets off ebay and then either flogging the wheels on or flogging my old set.

i run 19inch l322 wheels on my p38 all i needed was the wheel nuts from the l322 and spigot rings which i bought from ebay
reckon that will be all you will need.

Cheers mate, so the 19's need new adjustments and i beleive now that the 18's fit straight on. Ta..

The offsets are different for the P38/L322 (57mm) and the RR Sport (53mm).

You should opt for newer L322 wheels, not the RR Sport wheels TBH.

As Nathan says, all you need are black L322 nuts and spigot rings.

RANGE ROVER P38 WHEEL SPIGOT KIT FIT L322 WHEELS 2 P38 on eBay (end time 28-Feb-11 07:53:30 GMT)

Mk III Range Rover Tire Choices

can get nuts and spiggot rings on ebay six one two is the name of the company i used i think about £80 for the lot iirc

Thanks for the tips fellas, not bought a set yet but watching a few. Cheers.

Or if you go for 06> wheels, you'll want the silver nuts, not black, as they are for <06 wheels!

Just bought these

Range Rover Vogue 18" Alloy Wheels and Tyres x4 on eBay (end time 20-Mar-11 20:14:44 GMT)

Will these wheels fit straight on my P38 without spigot rings/new nuts?? If not I'll just swap the tyres over on to my Hurricanes because it's the tyres I wanted particularly and they seem a bargain at that price for 8mm Wranglers..

Can anyone give me a quick answer on above please? I have read through ther links and RR.net but still not sure.

They should be delivered in a day or so. Thanks.

not too sure but Ad says 50mm offset, so more likely to need spacers? I'd be waitin till they arrive, then see!

Ok cheers Ridesafe.

They will fit, but will need new nuts and spigot rings.

Forget what the ad says about the wheel spec as it's wrong apart from 18".

They will be fine and look a good buy.

But you will need some L322 black nuts and spigot rings.

Cheers. Might just swap the tyres over in that case and then sell them on with the 3mm scorpions I'm taking off. Keeps mine looking original that way I suppose.

Cheers for the info.