90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
1984 SIII Rebuild - with lots of pictures.
- Thread starter Sean
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
engine bay side of the bulkhead all masked
and after it's 4 coats of black enamel
rad panel looking all shiny, ready to be fitted if it's not peeing down in the morning
Oooooo your good at this painting lark.....110 on its way round in the morning for you to start on
Oooooo your good at this painting lark.....110 on its way round in the morning for you to start on
are you wanting the other axle painted silver as well ?
or was it gold ?
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
I've still got that as a spare lol......you got any flo green???
sorry no, plenty of ectoplasm green thou
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
that finish out of a rattle can? looks ok dunt it,
it ant bad is it
the final finish will be hand painted coach enamel (in Conniston Green)
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
it ant bad is it
the final finish will be hand painted coach enamel (in Conniston Green)
tis nice,
if yer hand paintin that coach enamel stick the tin in a bucket of hot water, works wonders,
tis nice,
if yer hand paintin that coach enamel stick the tin in a bucket of hot water, works wonders,
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
just wonderin, if yer got such a good finish now, why recoat it ?
because that's Brooklands Green ...... now that i've seen it for a few days i've concluded i should have used Conniston Green :doh:
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
right............. i told yer coniston this time last year , couldnt yer spray it ??, mines coniston
mines coniston
yer i know i know, spraying is far too easy
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
yer i know i know, spraying is far too easy
everythings too easy, thats why my series 2s still in bits not on the road
least am doin it proper, not cuttin corners, have not sprayed one bit yet, the 'ole lot has been done with enamel in hot water, engine , axles the lot far more satisfying doing it properlyeverythings too easy, thats why my series 2s still in bits not on the road
yer - when i come in from the garage after spending half a day in there Doris keeps asking the same question, time and time again
"you've been out there hours, is it finished yet"
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
some times i go in at 8 in the mornin and dont come out till gone midnight !
causes some right arguments, everyone that calls in says it will never be finished
il show 'um
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
wer a nice day fer it today sean, yer get much done ?
did nawt me self, still tryin to make room int workshop, gettin worse the more i move stuff,
did nawt me self,
still tryin to make room int workshop, gettin worse the more i move stuff,wer a nice day fer it today sean, yer get much done ?
did nawt me self,
didnt even get to go into the garage - ave been out hunting fer Transits
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
didnt even get to go into the garage - ave been out hunting fer Transits
get a 130, ****in transit recessions over mate, transits a plenty in the next few weeks not
