Whaddon 27th December

[Booger]

Boogers landy still not ready...

 

[carpy]

thats a bloody nice finish mate, how much did that cost you to do then?

 

[Booger]

£1500 but that was on condition he only worked on it when there was no other work to do, hence why it is taking so long

You should also look at vinyl wrapping as an option, I'll probably do that next time!

 

[jai_landrover]

rangie boys are going luke, jamie, alan i think mabe alf not 100 percent sure but last i heared they were going

 

[redwingslandrover]

going to look good when its finished andrew

 

[carpy]

£1500 but that was on condition he only worked on it when there was no other work to do, hence why it is taking so long

You should also look at vinyl wrapping as an option, I'll probably do that next time!

kin hell!!! im gonna go with kris' mate then

rangie boys are going luke, jamie, alan i think mabe alf not 100 percent sure but last i heared they were going

coolio, gonna be a **** lot of motors there then

 

[P38dseGAV]

what time is it and are RR p38 welcome

 

[P38dseGAV]

4x4 and motocross opening times and dates at Whaddon

 

[Booger]

kin hell!!! im gonna go with kris' mate then

Yea but he's done alot of other work, like fettling ****ty brit part doors to make them fit, and the paint is baked on 2pac, so it shouldn't come of with a pressure washer

 

[Booger]

going to look good when its finished andrew

Thanks, it certainly will be unique !

 

[stariont3]

im down as a maybe as i might be called into work and i wont know till boxing day.

 

[s underwood]

hoping to be there if i can persuade a driver may just be a spectator

 

[carpy]

what time is it and are RR p38 welcome

opens at 9 and anything is welcome, you can take a ford mondeo if you really want. just make sure you have a recovery point on the front and back so we can pull you out if you get stuck

Yea but he's done alot of other work, like fettling ****ty brit part doors to make them fit, and the paint is baked on 2pac, so it shouldn't come of with a pressure washer

im gonna be a tight git though.

thing is, to be able to sort my 110 it needs some quality time off the road, so i really need a second vehicle to get that to how i want it - RRC me thinks at some point in the new year

 

[Beast o Bodmin]

my rr is ace.taken body off and when im done it will out perform any 110..

 

[carpy]

my rr is ace.taken body off and when im done it will out perform any 110..

you can hardly say that mate, there are some exceptionally capable 110's about, you seen all of em?

 

[jai_landrover]

Now Now boys stop bitching!

I do think 92/100 inch is a goodsize for an offrader tho,
I mean RR classics in the right hands are awsome pitty they have so much overhang at the rear if it was only bob tailed nicley (not hacked off and then clad with ali chequerplate) with the same over hang as the front it would be an awsome beast. Pitty they need awful looking mods to get some bigger tyres on.

 

[carpy]

I am looking for a decent rangey - again.

I need an off road ****around toy badly, otherwise my 110 will keep bearing the brunt of it. my 110 is in need of a few additions / replacements - but it is currently my main road vehicle. I have the series II but it can hardly transport me to wales and back in speed and confort, so i need something to fill that niche for the minute so the 110 can have some TLC. Sounds like a job for a rangey - so thats one for the new year. If anyone knows of a decent condition rangey V8 drop me a line, coz im interested. I would rather spend a little more on one that isnt rusted to **** like many, hopefully will keep its value when i come to sell it then - if i sell it. I was going to use the 110 for a few europe trips and then sell that but i am so attached to the bugger im never gonna sell it - lets hope a rangey doesnt have the same effect

 

[reeves_luke]

what time are people meeting on sunday?

 

[carpy]

I will try to be there for around 9am ish when it opens, but anytime after that.

 

[B3aker]

I was aiming to get there for about 10ish.