gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
Nah, I'd have to get the missus to push it up the bloody hill
your point being is what.tell her it's good for the environment.:behindsofa::behindsofa::bolt:
P38 cold lack of power
- Thread starter declanor
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
your point being is what.tell her it's good for the environment.:behindsofa::behindsofa::bolt:
Datatek
Well-Known Member
- Posts
- 45,863
- Location
- Near Poitiers SW France
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
A happy missus is no trouble
i'm with you all the way there bud.
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
Replacing the in-tank sender pump helps improve bottom end a bit. I'd guess that this (and the chip) helps my one, which I thank is fine for an auto.
Branston
New Member
- Posts
- 13
- Location
- Batley, West Yorkshire.
Hello daveb284.
P38 2.5dse.120 k on the clock very good condition. Never had this hot start problem. The P38 starts first time even in the cold and is alittle num at first but will go, when warm is like the sh t off the old shovel, however I am not sure if the P38 as been chipped as I am not too sure what I would be looking for. Two things I picked up on with your thread is the 284, was my racing No years ago, and Leeds. I am a Leeds lad and live just out side now in Birstall.
P38 2.5dse.120 k on the clock very good condition. Never had this hot start problem. The P38 starts first time even in the cold and is alittle num at first but will go, when warm is like the sh t off the old shovel, however I am not sure if the P38 as been chipped as I am not too sure what I would be looking for. Two things I picked up on with your thread is the 284, was my racing No years ago, and Leeds. I am a Leeds lad and live just out side now in Birstall.
