GawneIn60Seconds
New Member
- Posts
- 3
- Location
- Devon, United Kingdom
Hi all! Newbie here
Model: 2006 Landrover Discovery 3 (Auto / 2.7L V6) Basic spec (so no no infotainment screen etc)
I've owned my Landrover for a week, and loved it so far, however when playing with all of the buttons and switches to see what everything does, I've popped it into low range, but it won't re-engage back into high range.
I feel like I've tried everything I can (I'm not particularly mechanically minded).
I've tried:
-Pushing the switch whilst in Neutral
-Pushing the shift into N whilst driving and pushing the button
-A reset procedure (ignition on, accelerator for 5sec, ignition off)
-Reversing
-Popping out the panel and cleaning the connections
-Central mode selection dial is switched to the very right hand position and correctly indicates 'no special modes activated' (or words to that effect)
It can't be a fuse, all other modes work perfectly, suspension modes all work fine, No error messages, Low range correctly indicated in the instrument cluster.
When pushing the range selector I get nothing at all, no beeps, no messages. nothing at all. (When I put it into low range it came up on the screen and lit up the light accordingly)
As such I'm limited to about 50mph which is a bit of a pain and I'm worried Im destroying the gearbox by continuing to drive it. (But need to get to work!)
I'm wondering if it's a faulty switch, but otherwise I'm a bit confused.
Any help or advice would be very much appreciated before I start spending money I don't have (because I spent it all on buying the car haha)
Model: 2006 Landrover Discovery 3 (Auto / 2.7L V6) Basic spec (so no no infotainment screen etc)
I've owned my Landrover for a week, and loved it so far, however when playing with all of the buttons and switches to see what everything does, I've popped it into low range, but it won't re-engage back into high range.
I feel like I've tried everything I can (I'm not particularly mechanically minded).
I've tried:
-Pushing the switch whilst in Neutral
-Pushing the shift into N whilst driving and pushing the button
-A reset procedure (ignition on, accelerator for 5sec, ignition off)
-Reversing
-Popping out the panel and cleaning the connections
-Central mode selection dial is switched to the very right hand position and correctly indicates 'no special modes activated' (or words to that effect)
It can't be a fuse, all other modes work perfectly, suspension modes all work fine, No error messages, Low range correctly indicated in the instrument cluster.
When pushing the range selector I get nothing at all, no beeps, no messages. nothing at all. (When I put it into low range it came up on the screen and lit up the light accordingly)
As such I'm limited to about 50mph which is a bit of a pain and I'm worried Im destroying the gearbox by continuing to drive it. (But need to get to work!)
I'm wondering if it's a faulty switch, but otherwise I'm a bit confused.
Any help or advice would be very much appreciated before I start spending money I don't have (because I spent it all on buying the car haha)