Defender 90 LED lights

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Prankstaaa

New Member
Posts
6
Location
Nottingham
Hi all
I have purchased some front lights however I’m looking for opinions for rear and side lights preferably LED. I have a 90 County as in pics, all recommendations are appreciated.
I would like all round however not sure if they will fit.
 

Attachments

  • IMG_7679.jpeg
    IMG_7679.jpeg
    365.2 KB · Views: 21
So many questions on here about LED lights not working with Landys.
I will say if you know your electrics then give it a go. If electrics not your thing then pass. Often not a case of just swapping over units. Oh and hello to the forum.
 
Often not a case of just swapping over units. Oh and hello to the forum.
Other than indicators all the others are just direct replacement plug and play.

I fitted RDX LED side, rear and fog lights to mine during the rebuild. I left the indicators as standard due to the endless threads of people fitting LEDS and them not working.
 
I fitted Rdx kit as well. Changed the side repeater to TD5 style( they do a fitting adapter)
Needed the Rdx dash tell tale light for the system to work
Also change the rear fog & reverse light to the normal rectangle style from britpart. These have lasted and are also LED
 
I would suggest you but an LED/COB bulb and see if that works first ...

As said side lights etc are normally not an issue with LED (normally not an issue, but can be).

The std bulbs are BA12 so any BA15 LED/COB variant will fit (and hopefully work).
eBay/Amazon/Temu are your friends.
 
So many questions on here about LED lights not working with Landys.
I will say if you know your electrics then give it a go. If electrics not your thing then pass. Often not a case of just swapping over units. Oh and hello to the forum.
Thanks for the reply and the welcome mate. I’m having my local specialist fit them whilst it’s having other items getting ready for MOT. The previous owner was a DIY electrician so that’s why I’m not attempting it lol 😂
 
Other than indicators all the others are just direct replacement plug and play.

I fitted RDX LED side, rear and fog lights to mine during the rebuild. I left the indicators as standard due to the endless threads of people fitting LEDS and them not working.
Thanks for the heads up ref indicators, I’ll 100% check that out.
I’ve not heard of RDX so I’ll go have a google. Do they do smoked lights?
 
I fitted Rdx kit as well. Changed the side repeater to TD5 style( they do a fitting adapter)
Needed the Rdx dash tell tale light for the system to work
Also change the rear fog & reverse light to the normal rectangle style from britpart. These have lasted and are also LED
Thanks for the reply, I was debating if to go round or rectangle on the fog/reverse as I was unsure if circle would fit due to the near rear 1/4. Where is the best place to buy RDX.
Thanks again.
 
I would suggest you but an LED/COB bulb and see if that works first ...

As said side lights etc are normally not an issue with LED (normally not an issue, but can be).

The std bulbs are BA12 so any BA15 LED/COB variant will fit (and hopefully work).
eBay/Amazon/Temu are your friends.
Thanks for the heads up mate, I’ll have a Google of the LED/Cob bulb. Not sure what cob is lol.
Thanks again
 
Keep the rectangular fog lights, looks better on an older defender in my opinion. I got my RDX ones from bolt on bits on ebay. They definitely do the clear lenses (I am also not a fan of them, keep it original looking) so there may well be smoked versions.
Cheers Dag, I will have a gander at bolt on bits. I personally am not a fan of the clear either, original or smoked are my preferred choice.
 
Back
Top