Stone56
Well-Known Member
- Posts
- 2,695
- Location
- Up a mountain
The sun only shines on the righteous (Adriatic ) ✌✌Eh sunwhich planet r u on Mercury
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Stone56
Well-Known Member
- Posts
- 2,695
- Location
- Up a mountain
Are the shingles for the garage roof though you where useing slateGot my first dose of shingles jab today now feel all sore, splitting head ache n shivery. Oh side effects are only a sore arm
aye right its the one thing I dont have she lied.
Stone56
Well-Known Member
- Posts
- 2,695
- Location
- Up a mountain
- Posts
- 6,092
- Location
- uk
They are likely on their knees financially and heading for total failure. Another bail out using tax payers money on the way
Mornin
Blowing hard during the night, all good though this morning
Up early as council surveyor arriving at 0800, going to try and stay calm.
Hope all safe after the storm
.Mornin
Blowing hard during the night, all good though this morning
Up early as council surveyor arriving at 0800, going to try and stay calm.
Hope all safe after the storm
Surveyor been, plasterer not getting paid for the terrible job and it's being done again.
He took some photos and promised to get it all sorted. ...Been here before....... twice ,,
Not holding my breath
- Posts
- 15,349
- Location
- Benfleet, Essex
Morning All.
Still here, still smiling.
Wife said she heard a very loud bang in the night, but I cannot see any damage anywhere. Maybe next door?
Have a great day.
Still here, still smiling.
Wife said she heard a very loud bang in the night, but I cannot see any damage anywhere. Maybe next door?
Have a great day.
Suffering from low volumes of mail due to competition, Surely the deliveries should be quicker if there's less mail to sort and deliver ??
- Posts
- 41,890
- Location
- East Dorset
Still Foggy!Good morning folks, it's Wednesday.
Had a banging head most of yesterday think I slept funny on my neck.
Woke up feeling better but still foggy.
No wonder he is grinning!!! Got beyong the first date!
- Posts
- 41,890
- Location
- East Dorset
Best of luck, with keeping you hands in your pockets!Mornin
Blowing hard during the night, all good though this morning
Up early as council surveyor arriving at 0800, going to try and stay calm.
Hope all safe after the storm
- Posts
- 41,890
- Location
- East Dorset
Marmalade finished jarring a minute ago, had to do it in two batches.
The first lot was not as good as the second, we had to alter the recipe as the fruit was so thin skinned the first lot didn't set quite as it should.
Nevertheless 34 jars of all sorts of sizes. Half with a wee tot of whisky in!
Have to drive W to the docs to get her arthritic hand joints injected.
Have a good day folks.
The first lot was not as good as the second, we had to alter the recipe as the fruit was so thin skinned the first lot didn't set quite as it should.
Nevertheless 34 jars of all sorts of sizes. Half with a wee tot of whisky in!
Have to drive W to the docs to get her arthritic hand joints injected.
Have a good day folks.
- Posts
- 15,349
- Location
- Benfleet, Essex
...that I may be in trouble wit the lathe motor current requirements.
IF you change a 4XX Volt 3-phase motor from Y to Delta, yes the current goes way up.
So a 480v motor went like this in t'interweb experts calcs:
Wow! that's a huge increase.
But…
I am going from 400v Y to 230v Delta, so it looks like this:
No none of these figures are measured, just calculated on standard formulas.
So we are going up to 20A maybe. I wonder if my 16A breaker will go pop?
Maybe I will need to alter my Garage “Spur” to 30A.
@My Old Landy ...what did yours come out at Brian, and what size breaker is on your lathe circuit may I ask?
IF you change a 4XX Volt 3-phase motor from Y to Delta, yes the current goes way up.
So a 480v motor went like this in t'interweb experts calcs:
| Volts | Root3 | Winding V | Ohms | Amps | |
| "WYE" | 480 | 1.732 | 277 | 20 | 13.85681 |
| Delta | 480 | 1.732 | 277 | 20 | 41.568 |
But…
I am going from 400v Y to 230v Delta, so it looks like this:
| Volts | Root3 | Winding V | Ohms | Amps | |
| "WYE" | 400 | 1.732 | 231 | 20 | 11.54734 |
| Delta | 230 | 1.732 | 133 | 20 | 19.918 |
So we are going up to 20A maybe. I wonder if my 16A breaker will go pop?
Maybe I will need to alter my Garage “Spur” to 30A.
@My Old Landy ...what did yours come out at Brian, and what size breaker is on your lathe circuit may I ask?
- Posts
- 8,762
- Location
- Solent
Yippee!Morning all, off to Castleford again today. Will be the last time as I am off for 12 days and the project will be over when I get back
Pics, pics, pics!
doriz
Well-Known Member
- Posts
- 16,782
Bloody hate hospitals. Folk wondering round with bits missing.
- Posts
- 21,540
- Location
- In the next Glen
Are the shingles for the garage roof though you where useing slate
Think I'll stick to the slates
- Posts
- 21,540
- Location
- In the next Glen
“for He makes His sun rise on the evil and on the good, and sends rain on the just and the unjust.” (kev lz 12.34)
...that I may be in trouble wit the lathe motor current requirements.
IF you change a 4XX Volt 3-phase motor from Y to Delta, yes the current goes way up.
So a 480v motor went like this in t'interweb experts calcs:
Wow! that's a huge increase.
Volts Root3 Winding V Ohms Amps "WYE" Delta
But…
I am going from 400v Y to 230v Delta, so it looks like this:
No none of these figures are measured, just calculated on standard formulas.
Volts Root3 Winding V Ohms Amps "WYE" Delta
So we are going up to 20A maybe. I wonder if my 16A breaker will go pop?
Maybe I will need to alter my Garage “Spur” to 30A.
@My Old Landy ...what did yours come out at Brian, and what size breaker is on your lathe circuit may I ask?
Hope you get it sorted. Try the 16A first and see what happens, but a new dedicated line would make it better.
Don't take my electrical advise I can make smoke with 12v
.J
- Posts
- 11,660
- Location
- Far out West
Our very own JC !!“for He makes His sun rise on the evil and on the good, and sends rain on the just and the unjust.” (kev lz 12.34)
Afternoon folks.
Been a lovely sunny bright day. Still white stuff on the best LR products on the drive, luckily we dont have to waste the fuel to deice.
Ms on the "now we can vote again" to find out what we need to do She has passed the message to our friends here and many haven't heard of it.
Watched Mama fox and 3 cubs walk, sniff and investigate our front garden and the road last night. To some they are a pest, To me they are wildlife and we the people have to live with them.
J
.Been a lovely sunny bright day. Still white stuff on the best LR products on the drive, luckily we dont have to waste the fuel to deice.
Ms on the "now we can vote again" to find out what we need to do
She has passed the message to our friends here and many haven't heard of it.Watched Mama fox and 3 cubs walk, sniff and investigate our front garden and the road last night
. To some they are a pest, To me they are wildlife and we the people have to live with them.J
Similar threads
