I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I've just replaced my rear shock absorbers and, while the wheels were off, gave it a clean underneath. The upper shrouds on the old ones fell to pieces in my hands as I was getting them off:
1699544318671.jpeg

I was aware they were getting a bit crispy, but that last bit of rust has progressed very quickly.

here's the new ones in place:
1699544444234.jpeg

Not too difficult a job. The nuts were rusted in place but were no match for the mighty Milwaukee impact wrench. Just after that picture was taken I gave the underside a brisk hose down with the pressure washer and got a lot of that grey road film off.
I think that's everything it needs for the MOT now. Sooner or later I'll re-touch the Dinitrol on the chassis where the rust is starting to reappear, but that is something I'll do at my leisure as it's not too bad just yet.
 
Eye is on charge. Cable wont reach as eye need the other side. Had to wait this time for the right side so went ferra drive to avoid the waiting charge. Then fort some more. If eye park side ways eye can charge ont wrong side wiv da cable that wont reach. Eating a sossij roll to cellerbrate me wonderfullness.
 
Eye is on charge. Cable wont reach as eye need the other side. Had to wait this time for the right side so went ferra drive to avoid the waiting charge. Then fort some more. If eye park side ways eye can charge ont wrong side wiv da cable that wont reach. Eating a sossij roll to cellerbrate me wonderfullness.
What a flipping palaver!!!!
 
I've just replaced my rear shock absorbers and, while the wheels were off, gave it a clean underneath. The upper shrouds on the old ones fell to pieces in my hands as I was getting them off:
View attachment 302167
I was aware they were getting a bit crispy, but that last bit of rust has progressed very quickly.

here's the new ones in place:
View attachment 302168
Not too difficult a job. The nuts were rusted in place but were no match for the mighty Milwaukee impact wrench. Just after that picture was taken I gave the underside a brisk hose down with the pressure washer and got a lot of that grey road film off.
I think that's everything it needs for the MOT now. Sooner or later I'll re-touch the Dinitrol on the chassis where the rust is starting to reappear, but that is something I'll do at my leisure as it's not too bad just yet.

Just a tad crispy 🤣
 
No different to having to wait ferra diesel pump. Then queue inside to pay. I have an extension cable but that will limit the charge as it dunt have the fast charge pins. Paying by credit card on me app.
No onehas to wait as long for a diesel pump, and you don't have to pay in advance nor risk overpaying with no chance of getting it back!;)
 
No onehas to wait as long for a diesel pump, and you don't have to pay in advance nor risk overpaying with no chance of getting it back!;)
Rye was in debt of 1.62 sov so added 10. Started on 8.62 and had 20kw offit so far. So eye is in debt again which eye will pay. If yer choose contactless payment yer charged what yer use. On app yer 0.02 sovs cheaper per kw than contactless.
 
Back
Top