I would just like to say

[Stanleysteamer]

My node works fine thanks.

J

Very pleased to hear it!!!


now, about your glands!!!

 

[derwendolly]

Na you've got it wrong, he was in the pen as he had been fed then I knackered him out playing with him
for 1/2 n hour, he'd fell asleep so I locked the cage & went for a take away an woke him up when I came
back an took the pic.

I totally misunderstood.

 

[kevstar]

Noo fridge came & another couple of coconuts trying to get it through the door
Na mate its not going in there trying to lay it flat & bring it in, me listen MATE the same model is in there
ive put 4 of these in & out in the last couple of months, fecken couple of drips couldnt lift one end up a few
inches over the front step double Ive put them in & out in myself.

Im so well built my mussels have there own big balls

Ahoo its in & got a 100 quid from Ao so thats chimbo dinner sorted

 

[kevstar]

I totally misunderstood.

Im probably to blame as I didnt explain it properly Sorry

 

[marjon]

Very pleased to hear it!!!


now, about your glands!!!

Yes sir I have big hands

J

 

[kevstar]

Yes sir I have big hands

J

Ah now we know why your called big ben haha

 

[Hippo]

 

[Hippo]

Damp inside growing mold

 

[My Old Landy]

Lucky you the fkn planning have came back yet again about my garage.
Upcv gutters not allowed as its not traditional & 20 meters away my house has upvc at the front
how can you tell what its made of from a distance, also the roof they dont like the style of profiling
& the doors need to be traditional wooden style

f u c k e n t o s s e r s...... Sick of it tbh thats over a year.

That is getting a bit stupid, sounds like you have a right plonker in the department!

 

[My Old Landy]

@DanClarke yes the plan is to insulate and line it next week. I will build in benches too. The wood lathe, bandsaw and new planer will live in there along with all the metal stock and unfinished projects

 

[Turktowner]

Damp inside growing mold

Drivers door made a wud! Does it float?

 

[DanClarke]

Morning All
Quite a cool one this morning.
Paper's got. Back here now having a coffee.
Delivering a chair to my lads later (if it will fit in the Rangie (they're not so spacious inside really).
Then lounging around for the rest of the day, although I may chop some more of that nudity wood for the fore tonight.
Have a great day.

 

[DanClarke]

@DanClarke yes the plan is to insulate and line it next week. I will build in benches too. The wood lathe, bandsaw and new planer will live in there along with all the metal stock and unfinished projects

This sounds great, I was imagining a proper lathe like yours going straight through the floor of that shed.

 

[Hippo]

Only £120 and it has some very good reviews. The stand is included in that price.

Gorra link?
Let us know if the fence is ok un straight.

 

[DanClarke]

Gorra link?
Let us know if the fence is ok un straight.

Sure, here you go. Fence seems ok to me.

 

[derwendolly]

Not raining but very mild - the day and night temps are almost equal!
Housework day today as my floors are looking like an extension of the garden courtesy of all the leaves, hedge trimmings etc brought in by the dogs. All the bits stick to them and then they spend the evenings pulling them all out and depositing them on the floor before falling asleep leaving me to do the clearing up.
Still mourning the probable loss of my overlocker. Do I do without or do I buy another is the question going through my mind.
Saturday has finally arrived so make the most of it and enjoy life to the full.

 

[Hippo]

Oh dear, what a bugre! I have learned, only recently I admit, to put stuff like that in a sealed plastic box with a big pack of that anhydrous crystal stuff. so it absorbs the condensation. But even then you have to keep an eye on it, being ready to dry the crystals out in the oven from time to time.
do hope he gets it sorted!

Thats not a good method. Lack of air flow and a temp difference of 2 degrees or more, outside to inside will cause condensation. Yer guaranteeing the creation of condensation in the hope crystals will solve it.

 

[Hippo]

Not raining but very mild - the day and night temps are almost equal!
Housework day today as my floors are looking like an extension of the garden courtesy of all the leaves, hedge trimmings etc brought in by the dogs. All the bits stick to them and then they spend the evenings pulling them all out and depositing them on the floor before falling asleep leaving me to do the clearing up.
Still mourning the probable loss of my overlocker. Do I do without or do I buy another is the question going through my mind.
Saturday has finally arrived so make the most of it and enjoy life to the full.

A machine of that age should come apart. Can yer get the covers oft so we can havva look at wots in there?

 

[Hippo]

Eye was lookin ont youtoob fer meffuds on resealing window frames. Tis obvious wot to do but yer never know wot ideas mite pop up. Some of me windows hassa draft. Eye knows this as eye can see and feel air movement around them. One fing eye has fort about is the seals need cleaned un mite not wurk as well as they shud. Found peeps ont toob replacing em anorl. Found it int screwfix. Called stormguard. Result. Eye will measure mine ter see iffit will fit.

 

[derwendolly]

A machine of that age should come apart. Can yer get the covers oft so we can havva look at wots in there?

I haven't got it at the moment, it is still with the repairer as he is trying to soak it in rust remover of some kind to see if he can free it up. Once it is declared totally deceased then I will collect it and put up some pics. I am sure he will tell me how to get inside it.