Discovery2 TD5 Chassis changes/differences advice

[JRT Fan]

Hello,

I'm pretty new to the forum,and never posted before, but I'm after some help/advice please.

I'm going to look at a Discovery 2 TD5 2004 that has had a body off restoration, and I am looking at some pictures of the chassis, and would like to confirm if there were any changes made to the later Facelift car chassis from the early chassis 1998-2002 ?

There seems to be a chassis cross member that is cylindrical on the picture I'm looking at and when I look at other pictures on the web, for later cars this cross member looks rectactangular in construction.

I will check the chassis number which is if I'm correct on the o/s/r chassis wheel arch area, but if anyone can point me to any early/late chassis identifiers I would be grateful.

I also don't want to buy a car with a donor chassis and fall foul of dvla.

Any help much appreciated.

Cheers

 

[frostythor]

Page 77-1-22 in the TD5 manual show the cylindrical member in place, Mines the same its a1999
Watch this video it shows vin number location

 

[JRT Fan]

Page 77-1-22 in the TD5 manual show the cylindrical member in place, Mines the same its a1999
Watch this video it shows vin number location

Thanks for your reply, I'll check out the video too.

 

[EeEk]

I thought the were round

The fact that it has a chassis is something of a miracle, most have turned to dust by now

 

[MJI]

2003 mine is round

 

[yfo866]

I thought the were round

The fact that it has a chassis is something of a miracle, most have turned to dust by now

My '02 D2 chassis is good. Never been welded
Shame the head gasket wasn't in as good a condition. That's getting fixed next week.

 

[JRT Fan]

My '02 D2 chassis is good. Never been welded
Shame the head gasket wasn't in as good a condition. That's getting fixed next week.

Thanks for the replies guys. I think what i;ve seen is reproduction chassis with a square/rectangular piece here instead, probably easier to fabricate?

 

[Stanleysteamer]

Thanks for the replies guys. I think what i;ve seen is reproduction chassis with a square/rectangular piece here instead, probably easier to fabricate?

.....as long as it does the job?