I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Stanleysteamer said:
Do you trust WD40 to be a lube then? I am very wary of it, When drilling which is about all the machining I do, I'll use 3in1. I think the difference is that ATF for instance is a fantastic lubricant but does it have the qualities needed when cutting metal?
Could start a whole thread on this!
PS I feckin hate working with stainless particularly due to its propensity to work harden in nothing flat and then eat drilling bits.
Found this which is quite interesting,
https://www.thomasnet.com/articles/process-equipment/cutting-fluids-for-machining/#:~:text=For tool steels and tough,mineral-fatty oil is used.

and discovered that WD do make a cutting lubricant!
https://www.screwfix.com/p/wd-40-cu...VGKp3Ch1gbg6bEAQYBSABEgL64PD_BwE&gclsrc=aw.ds
Maybe that is what you meant!:):):)
Click to expand...

I use CT-90 for drilling & tapping no time to put up a linky tis fish n chips time. :D
 
Today’s views from my cab.
C67EAF80-84F2-430F-80CC-AFABD0BB269B.jpeg 0EA24C2B-ECED-407A-9BE7-B87AD542E63E.jpeg
 
My Old Landy said:
I have been using standard WD40 for cutting aluminium and mild steel for as long as I can remember. The Rocol is for tapping and heavier cuts / harder materials. I have not used 3 in 1 as a cutting oil but I will give it a go. I am always will to try stuff as no one can know it all :)
Click to expand...
+1 Me too!
All a drillbit is looking for really is some cooling.
Ali Loves WD40 when being turned.
Steel, I am using "proper" cutting oil. But I am a noob at turning metal.
 
My Old Landy said:
I have been using standard WD40 for cutting aluminium and mild steel for as long as I can remember. The Rocol is for tapping and heavier cuts / harder materials. I have not used 3 in 1 as a cutting oil but I will give it a go. I am always will to try stuff as no one can know it all :)
Click to expand...
I wouldn't take anything I say as being a good idea! I am not a trained engineer and tend to just use what I have lying around.
In the days before the internet I used to buy old skool engineering books and take advice from them. They were interesting and had recipes for making stuff you could never make nowadays as the ingredients are now illegal to buy/sell!
When I visited the Enots factory that made the stuff I flogged as a rep, they worked brass and ally on computerised lathes, churning out fittings, valves etc at a very fast rate. They were very proud of the cleanliness of their swarf which they were able to sell for quite a sum. They used continuous flow cutting fluid that was a kind of milky brown, but then I hardly ever drill brass and at the time I wasn't interested enough to ask what it was.
Ally I find needs little lube, but then I usually only drill thin sections.
I also use 3in1 when hacksawing, for what it's worth!:)
 
Stanleysteamer said:
They used continuous flow cutting fluid that was a kind of milky brown, but then I hardly ever drill brass and at the time I wasn't interested enough to ask what it was.
Click to expand...
That is the flood coolant I mentioned. It is a water soluble oil (I know but yes it does exist!!) and requires care as it can breed bacteria that can cause all sorts of problems. I suffer from contact dermatitis and cannot risk it (I used it extensively in my youth which is what caused the problems with my skin).
I have many years experience but I will still listen to other methods as you never know what can help :)
 
Me screwdfix order be still not ready. Gorra message this mornin sayin it be send oat ware ouse to the chop. Wait fer massage ter say it be there. Int gorrit yet.

Ordered the blankin plate eye couldn't find before as eye int ordered it yet. So that be int other chop morra closer ter wuk.
 
My Old Landy said:
That is the flood coolant I mentioned. It is a water soluble oil (I know but yes it does exist!!) and requires care as it can breed bacteria that can cause all sorts of problems. I suffer from contact dermatitis and cannot risk it (I used it extensively in my youth which is what caused the problems with my skin).
I have many years experience but I will still listen to other methods as you never know what can help :)
Click to expand...
That makes sense, and in that link I put up it mentions many lubricants that are very water soluble.
Such a shame about the dermatitis.
No elf n safety in them days.
To think that nowadays you so rarely see a mechanic NOT wearing gloves.
In my yoof I used to coat my hands in washing up liquid, rubbing it right in until it was dry. It worked a treat as then any oil I had on my hands washed off easily, but it didn't work if I was dealing with coolant.:rolleyes:
I used to use barrier cream, but now like most, I use tough gloves which are a lot better than they used to be. Frinstance I only used two pairs all yesterday. :)
 
My Old Landy said:
That is the flood coolant I mentioned. It is a water soluble oil (I know but yes it does exist!!) and requires care as it can breed bacteria that can cause all sorts of problems. I suffer from contact dermatitis and cannot risk it (I used it extensively in my youth which is what caused the problems with my skin).
I have many years experience but I will still listen to other methods as you never know what can help :)
Click to expand...
KY Jelly? ;)
 
DanClarke said:
Morning All :D
We have had a little rain, but not much, so it is no test of the faulty leaking window frame.
Got the paper, what a lot of fuss over the Sussexes! Cant' see the point of them TBH.
Having the jitters over my conservatory re-build and "what could go wrong". :(
Anyway. have a nice day everyone. :D
Click to expand...
If yer new green ouse be too heavy when bolted to yer ouse, yer ouse may tip over onnits side.
 
Better day.
Spoke to dottir this mornin.
'Sorry Pa, I thort it were tomorra', then she she sang me happy birthday downa fone.
Prolly a white lie to keep Pa happy, but it'll do.

Nice email in me in tray this morning fromma boss. Summink along the lines of
'fonk mate, don't go on leave again!' Which was nice..
Week oft in a fortnite :D

An I spose I better own up. I washed the Tratter proper on Monday.
This $hitty weather is prolly a result of that, the Tratter Gods is punishin me.

Bad Turks :p
 
You must log in or register to reply here.

Similar threads

G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
301
SteveMarquis
SteveMarquis
L
Learning to fix Land Rovers like a pro - career advice wanted
Replies
10
Views
1K
kevstar
kevstar
K
What money should I be asking?
2
Replies
20
Views
1K
Atomician
Atomician
Lackingsense
Sport Air suspension/HDC fault
Replies
14
Views
1K
Lackingsense
Lackingsense
J
300 Tdi engine swap story - and a few questions
Replies
13
Views
2K
doriz
doriz
Back
Top