I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yesdi me un edgar were oat playing int snow. We built a snowtree. Ere tis:

tk44S4G.jpg

IMG_20210124_163944 tk44S4G

@RangeRoller dt
 
Drilled the oles int me garage floor. Lined it all up and they is int the right place. Only problem is the metal hoops that hold the drop bolt int place, allow the drop bolt to move back un forth away from the door. Circled below. Straight line is the movement direction. The result is me doors move back un forth with the drop bolt. The drop bolt is held int place by two hoops. One top one bottom. Both hoops doing the same fing. Any idea's on what to do to stop this?

I was finking of wrapping some thin metal wire round the hoop at the bit where the hoop is furthest from the door, to limit where the drop bolt can move.


in
NuCN07L.jpg

IMG_20210124_173622 NuCN07L

out
ltNp3Nk.jpg

IMG_20210124_173625 ltNp3Nk
 
Drilled the oles int me garage floor. Lined it all up and they is int the right place. Only problem is the metal hoops that hold the drop bolt int place, allow the drop bolt to move back un forth away from the door. Circled below. Straight line is the movement direction. The result is me doors move back un forth with the drop bolt. The drop bolt is held int place by two hoops. One top one bottom. Both hoops doing the same fing. Any idea's on what to do to stop this?

I was finking of wrapping some thin metal wire round the hoop at the bit where the hoop is furthest from the door, to limit where the drop bolt can move.


in
NuCN07L.jpg

IMG_20210124_173622 NuCN07L

out
ltNp3Nk.jpg

IMG_20210124_173625 ltNp3Nk

You fitting a 4 poster ramp?
 
Back
Top