I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I heards a rumour that the South African variant is not noticed by the vaccine, but this may be 'Fake Noos' ...
It was discussed on r4 earlier today. There is a concern the current vaccines won't wurk. Someone said they could tweek the current vaccines to solve that. That may mean thems who have already had a vaccine are not protected from the SA walrus but they is already lookin inter this un testin and finkin about fings. They will confirm soon worris the situation and if somefink needs done.
 
Bit quiet on here today, where is the usual crowd...@hippo @Hicap phill @derwendolly @kevstar @Shimsteriom @DanClarke @My Old Landy @Stanleysteamer et al? Oh, and @marjon :D and @Wimblowdriver @DevonGuy


Im err noo :)

Went to the workshop & was doing mortice n tenon's for the Siberian larch gates, I had to turn
my diesel heater off I was sweating o_O My mate went to the decking job to some landscaping.
he lost the coin toss "again" haha says he's never betting at anything again as ive won 6 in a row.:D:D
 
Im err noo :)

Went to the workshop & was doing mortice n tenon's for the Siberian larch gates, I had to turn
my diesel heater off I was sweating o_O My mate went to the decking job to some landscaping.
he lost the coin toss "again" haha says he's never betting at anything again as ive won 6 in a row.:D:D

These here sound nice gorrany pictures
 
Last edited:
It was discussed on r4 earlier today. There is a concern the current vaccines won't wurk. Someone said they could tweek the current vaccines to solve that. That may mean thems who have already had a vaccine are not protected from the SA walrus but they is already lookin inter this un testin and finkin about fings. They will confirm soon worris the situation and if somefink needs done.
Eventually peeps will realise that whatever the virus is / does, it can only be transmitted through being close to other peeps.
 
If you paid by paypal you can open a dispute within 180 days of the transaction you will
end up with your money back & get to keep the lathe. Been there done that. :D
I may have to do just that. Today the drive belt stripped 30% of its teeth and the thing is totally unusable. This is with <3 hours of "run-time". :mad:
I cannot even do simple jobs with it to "fix" the simplest problems these budget machines all have.
 
I may have to do just that. Today the drive belt stripped 30% of its teeth and the thing is totally unusable. This is with <3 hours of "run-time". :mad:
I cannot even do simple jobs with it to "fix" the simplest problems these budget machines all have.
I can't 'like' that as I feel for you. It is a pain that you splash out on a new toy that is not fit for purpose.
I hope you get your money back!
 
Back
Top