Changing a head

[Spaniel25]

Help.whilst replacing rocker gasket I snapped one of the bolts that hold the injectors in.so guess its replace head now.any guides in how to do this and set timing as I'm a complete novice to this.

 

[Turboman]

Help.whilst replacing rocker gasket I snapped one of the bolts that hold the injectors in.so guess its replace head now.any guides in how to do this and set timing as I'm a complete novice to this.

I don't know the vehicle, but is access so bad that you can't drill a hole in the bolt and use an easy out?

 

[freelance]

Yes, just remove the broken bolt

 

[Spaniel25]

Just order a bolt extractor in hope it will work(cant break it more than I have)
And it's a freelander td4 04 plate.
Replaced rocker gasket and it spat diesel out so thought tighten the bolts that hold injectors down and snap.

 

[andyfreelandy]

Injector nuts on studs require just 9Nm of torque.
If the injector is leaking then remove and replace the copper washer and O ring having cleaned out the injector hole first.

Hopefully there may be some stud still sticking out to unscrew.

 

[Spaniel25]

Well that would explain the leak as no o ring or washer.thoughr it was cheap.

 

[Spaniel25]

So yes to o ring but washers 2 out of 4.found the washers on net but does anyone know where I can get the injector bolts.