Rear corner bumper

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Millertime_9

Active Member
Posts
223
Location
Glasgow
Mine got snagged on my wee boys pram and fell off

I've bought replacement clips but for the life of me cant work out how it goes back on

Theres a wee screw bottom left, but if you align the corner panel with that, the clips dont align up!

What am I missing?

Is there a knack to it?
 
Mine got snagged on my wee boys pram and fell off

I've bought replacement clips but for the life of me cant work out how it goes back on

Theres a wee screw bottom left, but if you align the corner panel with that, the clips dont align up!

What am I missing?

Is there a knack to it?

I took mine off an put reflectors on the body panels as they have a tendency to jump off in fright when off roading lolz
 
As prep, install 1 clip in the hole in the side of the rear body panel & the other 2 in the front facing holes of the bumperette.
Then line up the 2 rear clips with the 2 body holes while sliding the bumperette internal side slot over the head of the side clip. Give the rear face of the bumperette a good push with the palm of your hand.
You should then have it all in place and should be able to flex the main bumper side downwards to get the screw in
 
Back
Top