HLDF can boot loader waiting to start download

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

stopover

Active Member
L322 - Car is 2005 diesel Range Rover with the can boot loader message showing. No radio or sat/nav.
Have replaced the Denso unit purchased a 2015 nav disk and YIA500010 recovery disk followed the instructions from the Service Bulletin but no joy. Have tried several times. Had battery charger on and engine running and getting 14.3 volt during the attempt.
Question I have TestBook and the disks up to 2006 will TestBook help with this problem? If so I will have to collect my TestBook system from a couple of hundred miles away. I use TestBook a lot but never had this problem to work on before.
Hope someone can help.

Would like to try, if someone can provide a link to the ISO file, for the recovery disk (YIA500010) so I can download the file and burn a new DVD and try that?
 
Last edited:
L322 - Car is 2005 diesel Range Rover with the can boot loader message showing. No radio or sat/nav.
Have replaced the Denso unit purchased a 2015 nav disk and YIA500010 recovery disk followed the instructions from the Service Bulletin but no joy. Have tried several times. Had battery charger on and engine running and getting 14.3 volt during the attempt.
Question I have TestBook and the disks up to 2006 will TestBook help with this problem? If so I will have to collect my TestBook system from a couple of hundred miles away. I use TestBook a lot but never had this problem to work on before.
Hope someone can help.

Would like to try, if someone can provide a link to the ISO file, for the recovery disk (YIA500010) so I can download the file and burn a new DVD and try that?

UPDATE: Sorted. Found the ISO file for YIA500010 and burnt a copy to DVD at slowest speed and this one worked! The £45 pound version off ebay would not work at all and is going back with a demand for a refund. Client very happy to have his radio and navigation plus access to everything on the touch screen. Result
 
UPDATE: Sorted. Found the ISO file for YIA500010 and burnt a copy to DVD at slowest speed and this one worked! The £45 pound version off ebay would not work at all and is going back with a demand for a refund. Client very happy to have his radio and navigation plus access to everything on the touch screen. Result
Would you be able to tell me how I can get a copy of this ISO. File YIA500010 as I am experiencing the same issue
 
Would you be able to tell me how I can get a copy of this ISO. File YIA500010 as I am experiencing the same issue
And Hi to you also. Fancy popping over to the Introduction forum and telling us a little about you and your vehicle.
There is also a handy book for those looking for help and assistance. Just click the thumbnail below
71PquRsxZTL.jpg
 
ISO image is a burnable/mountable disc image of an application or software. Clearly, someone wants the YIA500010 disc image so they can load it and fix a problem.
Which sadly the guy who found it, and fixed his problem, didn't say where he found it, or leave a link. So Google is the new guy's only friend :)
 
Back
Top