Steep learning curve

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Only slightly envious, weather has been dire here and I have 0 enthusiasm for going outside at all, it was as much as could do to muster the will to head out for groceries :oops:

You're getting there, bit by bit, that BH looks pretty sorry for itself though :eek:

I know new ones are way out of the price range but I really do think there is a market for someone to press vent repair panel sections, that is such a common rot spot, if I had a 100T hot press in the garden I would knock out a 100 or so and see what interest there was, tooling will be expensive though :rolleyes:
 
Yeah very strange how you can get outside but not inside. I could get 2 more outsides and just mirror them but that's a lot of expense for that. My way isn't the best way from rust perspective but it works and I'll seam seal it all and cover those joins in wax. I had those sections aside to do my disco floor edges but it's only cheap 1.2mm gear
 
I did spend the day there but it looks like I've done f all lol. Atleast I have a method though. Mate the yrm bulkhead feet and the door posts are so nicely made
 
resto_d1 said:
I did spend the day there but it looks like I've done f all lol. Atleast I have a method though. Mate the yrm bulkhead feet and the door posts are so nicely made
Click to expand...

I bought some a looooong time ago for my series 3 when I did some repairs on that, can't remember who made them TBH but they were really good back then too, bulkhead outriggers and rear front spring hanger and body mount outriggers were BritPart if I remember correctly, also some very well made parts back then.

YRM must make their money selling boat loads with low margins because I think they put a lot of effort into making super nice parts that are relatively cheap.
 
Very little progress as of late. I had that day up the farm but that was about it. Will be fairly busy over Christmas (aren't we all).

My next step is locating the suspension mount holes on my new section of chassis. I think when its dry I'll put fresh string lines in and try and mock up a template for location.

I did plan to use new crush tubes but may deox existing. This is due to the fact they are all connected so if I get 2 holes lined up the third should lane right!

I've just been watching a few more videos - Tacoma rebuilds (yank hilux) as they rot in similar place to mine. A lot of this yank stuff doesn't even use box chassis and uses almost I beams instead??

A little quick sketch I just did in regards to strengthening over my joints. All will be 2mm.
upload_2018-12-18_15-22-12.png
 
I've got a screaming/crying/sh1tting bundle of joy to halt my progress, what's your excuse :rolleyes:

Them fish plates look like a nice design, big holes in there for you to run internal beads around I presume?

If you like a good chassis repair then have a look at the Nissan Navara's they like to snap just behind the cab in front of the rear axle swan neck :eek:
 
dieseldog69 said:
I've got a screaming/crying/sh1tting bundle of joy to halt my progress, what's your excuse :rolleyes:

Them fish plates look like a nice design, big holes in there for you to run internal beads around I presume?

If you like a good chassis repair then have a look at the Nissan Navara's they like to snap just behind the cab in front of the rear axle swan neck :eek:
Click to expand...

You got it mate internal runs. Yeah the navaras constantly come up in my suggestion lol

The rain and darkness really!!
 
The Mad Hat Man said:
yu shouldnt keep treating her.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
to Micks burgers :D
Click to expand...

I passed Portsdown hill tonight in an attempt to skirt round the dire traffic and can't help thinking that he has such a perfect location there, we can eat burgers an hot dogs and then sit on the bench and watch the hustle and bustle of Pompey from afar :)

resto_d1 said:
You got it mate internal runs. Yeah the navaras constantly come up in my suggestion lol

The rain and darkness really!!
Click to expand...

I'm looking at a local corner unit of 450sq/ft with a roller shutter door and 3ph electric but they won't budge on £600/month +VAT +rates +utilities :eek: I can rent ex council lockups for £200/month but no power and too far away from home :(
 
dieseldog69 said:
I passed Portsdown hill tonight in an attempt to skirt round the dire traffic and can't help thinking that he has such a perfect location there, we can eat burgers an hot dogs and then sit on the bench and watch the hustle and bustle of Pompey from afar :)
Click to expand...
In the P1ssistantly falling rain? feck orf.... I will be in a nice dry bar :)
 
dieseldog69 said:
I passed Portsdown hill tonight in an attempt to skirt round the dire traffic and can't help thinking that he has such a perfect location there, we can eat burgers an hot dogs and then sit on the bench and watch the hustle and bustle of Pompey from afar :)



I'm looking at a local corner unit of 450sq/ft with a roller shutter door and 3ph electric but they won't budge on £600/month +VAT +rates +utilities :eek: I can rent ex council lockups for £200/month but no power and too far away from home :(
Click to expand...
council lockups here are £45 a month
 
dieseldog69 said:
I passed Portsdown hill tonight in an attempt to skirt round the dire traffic and can't help thinking that he has such a perfect location there, we can eat burgers an hot dogs and then sit on the bench and watch the hustle and bustle of Pompey from afar :)



I'm looking at a local corner unit of 450sq/ft with a roller shutter door and 3ph electric but they won't budge on £600/month +VAT +rates +utilities :eek: I can rent ex council lockups for £200/month but no power and too far away from home :(
Click to expand...

I was looking when I had jap stuff. If you were closer I would've gone halves
 
Hicap phill said:
That's a pricey unit
Unsure of the size but I can fit my 7.5t lorry & Landrover & open doors/ramps. Plenty room around this. this works out £350.
Click to expand...
Floor space is 7 meters by 6 meters with a WC & office in an attached lean too and includes a 20 foot shipping container for external storage but that's just mental money for what it is, unless of course he wanted to price me out of wanting it? But I will keep looking for now :oops:

I must admit, everything is cheap in Swindon, even the wammins only needs 1 not 2 Bacardi Breezers

The Mad Hat Man said:
council lockups here are £45 a month
Click to expand...

HBC has a waiting list for actual council owned units so they told me and the only ones I could find were in Portsmouth and privately owned for rent.
 
dieseldog69 said:
Floor space is 7 meters by 6 meters with a WC & office in an attached lean too and includes a 20 foot shipping container for external storage but that's just mental money for what it is, unless of course he wanted to price me out of wanting it? But I will keep looking for now :oops:

I must admit, everything is cheap in Swindon, even the wammins only needs 1 not 2 Bacardi Breezers



HBC has a waiting list for actual council owned units so they told me and the only ones I could find were in Portsmouth and privately owned for rent.
Click to expand...
i can make enquiries, but it would be up here :eek:
 
You must log in or register to reply here.

Similar threads

V
Hello!
Replies
3
Views
374
brianp38dse
brianp38dse
Mr K
Freelander 1 Alisport Intercooler - Should I do another remap??
Replies
0
Views
141
Mr K
Mr K
Rockingit
L322 Rear subframe.... do I do it?! 😮
Replies
3
Views
565
rover75lover
rover75lover
F
Freelander2 SD4 2014
Replies
3
Views
509
Nodge68
Nodge68
S
Suspension Nightmare Unsolved!
Replies
4
Views
548
sierrafery
sierrafery
Back
Top