Sabbsy
Member
- Posts
- 50
- Location
- Chorley, Lancashire
Looking to replace my piping to the ABS modulator i.e. 6 pipes. Does anyone know the part numbers for these and instructions to install. Thanks in advance.
L322 2003 ABS Piping - Part numbers required
- Thread starter Sabbsy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,947
- Location
- Near Poitiers SW France
All 6 pipes? What the heck has happened that you need to do that?
Sabbsy
Member
- Posts
- 50
- Location
- Chorley, Lancashire
Datatek
Well-Known Member
- Posts
- 45,947
- Location
- Near Poitiers SW France
Pipes are a bit sooty but they are steel so may be OK with a clean up and a coat of stone chip paint.
Sabbsy
Member
- Posts
- 50
- Location
- Chorley, Lancashire
What would you use to clean them or am I being stupid by asking?
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Brake cleaner and 180g emery.
If you do a nice job you can lacquer them.
If you do a nice job you can lacquer them.
Datatek
Well-Known Member
- Posts
- 45,947
- Location
- Near Poitiers SW France
Brake cleaner should remove all the sooty deposits, otherwise Acetone. Personally i would only use abrasive as a last resort.
Sabbsy
Member
- Posts
- 50
- Location
- Chorley, Lancashire
Thanks guys help really appreciated
