P38A Anti-roll bar link assembly

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Grrrrrr

Technician, Bodgit & Scarper Ltd
Full Member
Posts
18,914
Location
Buckinghamshire, UK. ('95 DT)
Anyone know if the anti roll bar link assembly comes with the nuts? Part number ANR3304, I think. If not, does anyone know the part number for the nuts and the type of nut they are. I assume nyloc of some sort but unsure of the thread / size.
 
I bought genuine from Rimmer Bros as I was in a rush and wanted quality. No nuts! Guess a bit of threadlock on the old nuts would be OK?

hi

know it’s no good to u now as you’ve ordered them but i bought Meyle and they come with all new nuts etc

was just on the off chance for future reference for u,


https://www.advancedfactors.co.uk/front-anti-roll-bar--links-radius-arms--panhard-rod-1730-c.asp

1B96219C-E5BE-4CA8-BA6A-589E405501C9.jpeg
 
Last edited:
Typical Land rover. Charging £23.47 each for something that should at worst be no more that a tenner then wanting £2.90 each for four nuts that would be dear anywhere at a quid apiece. Rip off merchants and no mistake.
 
Typical Land rover. Charging £23.47 each for something that should at worst be no more that a tenner then wanting £2.90 each for four nuts that would be dear anywhere at a quid apiece. Rip off merchants and no mistake.

think like many of us do , end up buying a compete set with different sizes of nyloc nuts either off line or halfords for around a tenner and indeed save a lot that way

agree ref JLR regarding some of the silly prices , also seeing u can often buy genuine items not in a land rover box considerably cheaper

ie , needed to get some new air line connectors and nearly fell over @ £14.11 each :eek:

https://www.advancedfactors.co.uk/anr6460-voss-connector-100060-p.asp

instead bought 10 x brass pushfit rated at 80 bar for £2.62 each instead of those voss connectors

https://www.advancedfluidsolutions....ass-push-fit-straight-stud-fitting-2875-p.asp
 
I nip round to Activ-air for airlines stuff. They do planes and trucks so a Rangie is a walk in the park.

quite agree with commercial rated air fittings being suitable for our landies , very handy for ur goodself having the company on ur doorstep

just couldn’t get over how expensive those voss connectors were, also found buying the brass pushfit ones were so much easier to install on top of my new struts and back of the new air tank

marked the pipes to ensure they were pushed in correctly and didn’t have to mess around trying to use a spanner
 
Back
Top